[1] |
Hohe J, Goswami S, Becker W. Assessment of interface stress concentrations in layered composites with application to sandwich panels[J].Computational Materials Science,2003,26:71-79. doi: 10.1016/S0927-0256(02)00394-4
|
[2] |
Chamis C C, Aiello R A,Murthy P L N. Composite sandwich thermostructural behavior: computational simulation[A].In:Proceeding of the 27th Structure, Structural Dynamics, and Materials Conference[C].Texas USA:Part 1. San Antonio,TX,1986,370-381.
|
[3] |
Chamis C C, Aiello R A,Murthy P L N. Fiber composite sandwich thermostructural behavior: computational simulation[J].J Compos Tech Res,1988,10(3):93-99. doi: 10.1520/CTR10135J
|
[4] |
Elspass W, Flemming M.Analysis of precision sandwich structures under thermal loading[A].In:Proceeding of 17th Congress of the International Council Aeronautical Sciences[C].Sweden:Vol 2. Stockholm,Sweden,1990,1513-1518.
|
[5] |
Burton W S, Noor A K.Three-dimensional solutions for thermomechanical stresses in sandwich panels and shells[J].J Eng Mech, ASCE,1994,120(10):2044-2071. doi: 10.1061/(ASCE)0733-9399(1994)120:10(2044)
|
[6] |
Jeusette Jean-Pierre,Laschet Gottfried. Pre- and postbuckling finite element analysis of curved composite and sandwich panels[J].AIAA J,1990,28(7):1233-1239. doi: 10.2514/3.25199
|
[7] |
Chai Gin-Boay, Seah Leong-Keey, Chuwa Lee-Soon. Stress distribution in sandwich beams under tension[J].Composite Structure,1999,45(3):195-204. doi: 10.1016/S0263-8223(99)00026-4
|
[8] |
Petras A, Sutcliffe M P F.Indentation resistance of sandwich beams[J].Composite Structure,1999,46(4):413-424. doi: 10.1016/S0263-8223(99)00109-9
|
[9] |
Petras A. Sutcliffe M P F. Indentation failure analysis of sandwich beams[J].Composite Structure,2000,50(3):311-318. doi: 10.1016/S0263-8223(00)00122-7
|
[10] |
McCormack T M,Miller R, Kesler O,et al.Failure of sandwich beams with metallic foam cores[J].Internat J Solids Struct,2001,38(28/29):4901-4920. doi: 10.1016/S0020-7683(00)00327-9
|
[11] |
Kassapoglou C, Fantle S C, Chou J C. Wrinkling of composite sandwich structures under compression[J].Journal of Composites Technology & Research,1995,17(4):308-316.
|
[12] |
Maiti S K,Shanbhag M R,Eswaran K. Cracktip shielding in adhesive bounded sandwich panels[J].Internat J Fract,1992,58(4):63-68. doi: 10.1007/BF00048959
|
[13] |
Cantwell W J, Davies P. A test technique for assessing core-skin adhesion in composite sandwich structure[J].J Mater Sci Lett,1994,13(3):203-205. doi: 10.1007/BF00278162
|
[14] |
Scott Burton W,Noor A K. Structural analysis of the adhesive bond in a honeycomb core sandwich panel[J].Finite Elements Anal Design,1997,26(3):213-227. doi: 10.1016/S0168-874X(96)00081-9
|
[15] |
Huang S-J.An analytical method for calculating the stress and strain in adhesive layers in sandwich beams[J].Composite Structures,2003,60(1):105-114. doi: 10.1016/S0263-8223(02)00288-X
|
[16] |
冯仁杰, 于九明.蜂窝夹芯复合板及其在汽车工业中的应用[J].汽车工艺与材料,2003,(8):30-32.
|
[17] |
张广平,戴干策.复合材料蜂窝夹芯板及其应用[J].纤维复合材料,2000,(2):25-27.
|
[18] |
杨杰,沈惠申.复合材料层合夹芯板局部变形行为研究[J].工程力学,2002,19(1):135-138.
|