堆浸浸出率灰色动态GDM(1,1)预测研究

刘金枝; 吴爱祥

堆浸浸出率灰色动态GDM(1,1)预测研究

刘金枝¹,
吴爱祥²

1.
上海水产大学信息学院,上海 200090;2.北京科技大学土木与环境工程学院,北京 100083

基金项目: 国家自然科学基金资助项目(50574099);国家创新群体基金资助项目(50321402);湖南省自然科学基金资助项目(06JJ30024)

详细信息

作者简介:
刘金枝(1971- ),女,湖南益阳人,副教授,博士(联系人.E-mail:liu0619@mail.csu.edu.cn).

中图分类号: TD953
计量
- 文章访问数: 2453
- HTML全文浏览量: 151
- PDF下载量: 577
- 被引次数: 0
出版历程
- 收稿日期: 2007-09-17
- 修回日期: 2008-02-20
- 刊出日期: 2008-04-15

Research on the Prediction of Leaching Rate in Heap Leaching Process by the Grey Dynamic Model GDM(1,1)

LIU Jin-zhi¹,
WU Ai-xiang²

1.
College of Information Technology, Shanghai Fisheries University, Shanghai 200090, P. R. China;

摘要

摘要: 基于灰色系统理论扩展了GM(1,1)模型建模方法．给出了一些既改善原始数据列的光滑度，又减少还原误差的变换函数构造条件．首次将灰色动态模型结合变换函数应用于堆浸过程浸出率的预测．结果表明：该方法预测精度高，为实现浸出动力学未来行为的预测和控制提供了一种新的方法．
- 堆浸 /
- 预测 /
- 灰色理论 /
- 动态模型
Abstract: The method of developing GM(1,1) model is extended on the basis of grey system theory.Some conditions of the transfer function,which not only improve the smooth degree of original data sequence but also decrease the revert error,were given.The grey dynamic model was first combined with the transfer function to predict the leaching rate in heap leaching process.The results show that high accuracy of prediction can be expected by the method used.This provides a new approach to realize the prediction and control of the future behavior of leaching kinetics.
- leaching rate /
- prediction /
- grey theory /
- dynamic model

HTML全文

参考文献(15)

[1]	李壮阔，桂斌旺，段希祥.德兴铜矿堆浸厂的生产实践及技术研究[J].矿冶工程,2002,22(1):46-48.
[2]	刘汉钊，张永奎.难处理低品位金矿细菌堆浸的现状和前景[J].四川地质学报,1998,18(3):234-240.
[3]	田原，关自斌，高仁喜.铀、金矿石的堆浸技术进展[J].铀矿冶,1998,17(2):121-126.
[4]	谭凯旋，王清良，伍衡山.溶浸采矿热力学和动力学[M].长沙:中南大学出版社,2003,102-135.
[5]	邓聚龙.灰色系统理论导论[M].武汉:华中理工大学出版社,1990,329-380.
[6]	Xu Q Y,Wen Y H.The application of Grey model on the forecast of passenger of international air transportation[J].Transp Plann J Q,1997,26(3):525-555.
[7]	ZHAO Kui,DENG Hui,JIN Jie-fang. Predicted model and application of ore grade based on the Grey system theory[J].System Engineering,2004,28(11):43-45.
[8]	TIEN Tzu-li. A research on the prediction of machining accuracy by the deterministic grey dynamic model DGDM(1,1,1)[J].Applied Mathematics and Computation,2005,161(11):923-945. doi: 10.1016/j.amc.2003.12.061
[9]	LIN Chin-tsai,YANG Shih-yu.Forecast of the output value of Taiwan’s opto-electronics industry using the grey forecasting model[J].Technological Forecasting and Social Change,2003,70(3):177-186. doi: 10.1016/S0040-1625(01)00191-3
[10]	WU Wann-yih,CHEN Shuo-pei.A prediction method using the grey model GMC(1,n) combined with the grey relational analysis: a case study on internet access population forecast[J].Applied Mathematics and Computation,2005,169(4):198-217. doi: 10.1016/j.amc.2004.10.087
[11]	Deng J L.GM model in Grey system theory[J].Fuzzy Mathematics,1985,12(2):23-32.
[12]	CHEN Tao-jie.The extend of grey prediction model[J].System Engineering,1990,16(4):52-55.
[13]	YU De-jiang. Discussion on method of grey system model[J].System Engineering,1991，17(5):9-12.
[14]	Deng J L. On judging the admissibility of grey modeling via class ratio[J].Journal of Grey System,1993,21(4):244-249.
[15]	王清良.大布矿床矿石室内浸出实验研究报告[R]. 衡阳：核工业第六研究所，2002.