基于有限元的金属基短纤维复合材料MMC的一种统计蠕变模型

岳珠峰

基于有限元的金属基短纤维复合材料MMC的一种统计蠕变模型

岳珠峰^1,2

1.
西北工业大学, 工程力学系, 西安, 710072;
2.
鲁尔大学, 材料研究所, 波鸿, D44780, 德国

基金项目: 国家自然科学基金资助项目(50005016)

详细信息

作者简介:
岳珠峰(1965- ),男,江苏丹阳人,教授,博士(zfyue@hotmail.com).

中图分类号: TG113
计量
- 文章访问数: 2403
- HTML全文浏览量: 142
- PDF下载量: 570
- 被引次数: 0
出版历程
- 收稿日期: 2000-10-10
- 修回日期: 2001-12-21
- 刊出日期: 2002-04-15

Statistic Modeling of the Creep Behavior of Metal Matrix Composites Based on Finite Element Analysis

YUE Zhu-feng^1,2

1.
Department of Applied Mechanics, Northwestern Polytechnical University, Xi'an 710072, P. R. China;
2.
Institute of Materials, Ruhr University, 44780 Bochum, Germany

摘要

摘要: 在有限元分析的基础上建立了一个单向应力状态下金属基短纤维复合材料(MMC)的统计蠕变模型.首先建立细胞模型并进行有限元分析,得到了单向应力状态下材料细观尺寸及载荷方向对宏观蠕变响应的影响规律.通过在细胞模型中增加一界面层(考虑材料特性和厚度)来研究基体和纤维的界面对MMC宏观蠕变响应的影响.基于细胞模型的数值结果,提出了一适用于纤维平面随机分布的随机统计模型,该模型考虑了纤维的断裂.通过试验获得纤维的统计分布规律.分析结果表明随机统计模型可以满意地描述试验结果.进一步讨论了材料细观尺寸,纤维的断裂特性以及界面层的材料特性和厚度对MMC宏观蠕变响应的影响.
- 细胞模型 /
- 有限元 /
- MMC /
- 蠕变响应 /
- 纤维断裂 /
- 统计模型 /
- 细观纤维尺寸与分布
Abstract: The aim of the paper is to discover the general creep mechanisms for the short fiber reinforcement matrix composites (MMCs) under uniaxial stress states and to build a relationship between the macroscopic steady creep behavior and the material micro geometric parameters. The unit cell models were used to calculate the macroscopic creep behavior with different micro geometric parameters of fibers on different loading directions. The influence of the geometric parameters of the fibers and loading directions on the macroscopic creep behavior had been obtained, and described quantitatively. The matrix/fiber interface had been considered by a third layer, matrix/fiber interlayer, in the unit cells with different creep properties and thickness. Based on the numerical results of the unit cell models, a statistic model had been presented for the plane randomly-distributed-fiber MMCs. The fiber breakage had been taken into account in the statistic model for it starts experimentally early in the creep life. With the distribution of the geometric parameters of the fibers, the results of the statistic model agree well with the experiments. With the statistic model, the influence of the geometric parameters and the breakage of the fibers as well as the properties and thickness of the interlayer on the macroscopic steady creep rate have been discussed.
- unit cell model /
- finite element method /
- MMCs /
- creep behavior /
- breakage of fiber /
- statistic model /
- fiber parameters and distribution

HTML全文

参考文献(12)

[1]	Dragone T L,Nix W D.Geometric affecting the internal stress distribution and high temperature creep rate of discontinuous fiber reinforced methods[J].Acta Metall Mater,1990,38(4):1941-1953.
[2]	Dong M,Schmander S.Transverse mechanical behavior of fiber reinforced composites-FE modeling with embedded cell models[J].Computational Materials Science,1996,5(1):53-66.
[3]	Li J Y,Landon T G.High strain rate superplasticity in metal matrix composites:the role of load tranfer[J].Acta Mater,1998,46(10):3937-3948.
[4]	Tvergaad V.Effects of ductile matrix failure in three dimensional analysis of metal matrix composites[J].Acta Mater,1998,46(9):3637-3648.
[5]	Li Y,Ramesh K T.Influence of particle volume fraction,shape and aspect ratio on the behavior of particle-reinforced metal-matrix composites at high rates of strain[J].Acta Mater,1998,46(10):4033-4046.
[6]	Kelly A,Street K N.Creep of discontinuous fiber composites-Ⅱ:theory for the steady state[J].Proc Royal Soc A,1972,328(2):283-293.
[7]	Johannesson B,Pederson O B.Analytical determination of the average Eshelby tensor for transverely isotropic fiber orientation distributions[J].Acta Mater,1998,46(8):3165-3173.
[8]	Kaustraeter G,Skrotzki B,Eggler G.Creep behavior on AlMg5 and AlZn11 and their fiber reinforced variants[A].In:M Ashby,J Earthman Eds.Proc International Conference Light Alloys and Composites,13-16,May,1999,Zakopanne:Kluwer Academic Publisher,1999,279-285.
[9]	Goto S,McLean M.Role interfaces in creep of fiber-reinforced metal-matrix composites[J].Acta Metall Mater,1991,39(2):153-164,165-177.
[10]	Dlouhy A,Merk N,Eggeler G.A microstructural study of creep in short fiber inforced aluminium alloys[J].Acta Matall Mater,1993,41(8):3245-3256.
[11]	Eggeler G.On the mechanism of creep in short fiber reinforced aluminium alloys[J].Z Metallkd,1994,85(1):39-46.
[12]	Dlouhy A,Eggeler G.Aquantitative metallographic study of a short fiber reinforced aluminium alloy[J].Prakt Metllogr,1993,30(4):172-185.