固体弹性三维问题统一解

许强; 孙焕纯

固体弹性三维问题统一解

许强¹,
孙焕纯²

1.
同济大学建筑工程系, 上海, 200092;
2.
大连理工大学工程力学系, 大连, 116023

详细信息

作者简介:
许强(1951- ),男,安徽安庆人,副教授,博士,研究方向为工程数理问题的数值算法,已发表论文20余篇.

中图分类号: O343.2;TB33
计量
- 文章访问数: 2253
- HTML全文浏览量: 105
- PDF下载量: 524
- 被引次数: 0
出版历程
- 收稿日期: 2000-07-27
- 修回日期: 2001-07-03
- 刊出日期: 2001-12-15

Unified Way for Dealing With Three-Dimensional Problems of Solid Elasticity

XU Qiang¹,
SUN Huan-chun²

1.
Department of Building Engineering, Tongji University, Shanghai 200092, P. R. China;
2.
Department of Engineering Mechanics, Dalian University of Technology, Dalian 116023, P. R. China

摘要

摘要: 依据三维弹性力学问题的Kelvin解,用三维虚边界元法来建立积分方程,从而使三维实体和各类板、壳等问题的求解思想得到统一.对各类三维问题采用统一的思想建立数学模型,更有利于程序模块化,增强了程序的通用性.另外,建立积分方程时直接引用Kelvin解,而未引入任何其它假设,使该方法的解更偏于实际,且使应用范围拓宽.再者,与边界元直接法相比,该方法的优点在于无需处理奇异积分,且系数阵是对称的.最后给出部分算例,以证明方法的有效性和计算精度.
- 虚边界元 /
- 最小二乘法 /
- 弹性力学问题统一解
Abstract: Unified way for dealing with the problemsal of three dimensional solid, each type of plates and shells etc. was presented with the virtual boundary element least squares method(VBEM). It proceeded from the differential equations of three-dimensional theory of elasticity and employs the Kelvin solution and the least squares method. It is advantageous to the establishment of the models of a software for general application to calculate each type of three-dimensional problems of elasticity. Owing to directly employing the Kelvin solution and not citing any hypothesis, the numerical results of the method should be better than any others. The merits of the method are highlighted in comparison with the direct formulation of boundary element method(BEM). It is shown that coefficient matrix is symmetric and the treatment of singular integration is rendered unnecessary in the presented method. The examples prove the efficiency and calculating precision of the method.
- virtual boundary element /
- least squares method /
- unified way of elasticity

HTML全文

参考文献(9)

[1]	许强,孙焕纯.厚壳三维分析的虚边界元最小二乘法 [J].大连理工大学学报,1996,36(4):413-418.
[2]	许强,孙焕纯.虚边界元最小二乘配点法[J].计算力学学报,1997,14(2):166-173.
[3]	孙焕纯,许强.数理方程的虚边界元法及其与相关方法的关系[J].大连理工大学学报(博导专辑),1999,39(2):183-190.
[4]	许强,孙焕纯.板弯曲问题三维虚边界元分析[J].工程力学学报,2000,17(3):23-30.
[5]	许强,戴月辉,等.虚边界元法解不同介质的组合结构[J].铁道学报,2000,增刊:76-78.
[6]	付宝连,谭文锋.求解厚矩板弯曲问题的功的互等定理法[J].应用数学和力学,1995,16(4):367-379.
[7]	Wang Y C,Ye J Q,Wang Z H.Spline boundary element method for shallow thin-shells[A].In:DU Qing-hua Ed.Boundary Elements[C].Beijing:Pergamon Press,1986:375-382.
[8]	Burges G J,Mahajerin E.A comparison of the boundary element and superposition methods[J].Comput Structures,1984,19(2):697-705.
[9]	Brebbia C A,Telles J C F,Wrobel L C.Boundary Element Techniques Theory and Application in Engineering[M].Berlin:Springer-Verlag,1984:177-236.