夹杂和裂纹的相互作用及端点相交的奇性性态分析

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名

邮箱

手机号码

标题

留言内容

验证码

The Crack-Inclusion Interaction and the Analysis of Singularity for the Horizontal Contact

Department of Engineering Mechanics, Shanghai Jiaotong University, Shanghai 200030, P R China

摘要: 利用单根裂纹和单根夹杂的基本解,通过弹性力学的线性叠加原理,将平面裂纹和夹杂相互作用的问题归结为解一组带有柯西型奇异积分的积分方程组,计算了裂纹和夹杂端点的应力强度因子。给出了一些数值例子。并对夹杂和裂纹水平接触时的情形作了奇性分析。结果可作为研究夹杂尖端引起的裂纹及其扩展的工程分析的计算模型。
- 裂纹 /
- 夹杂 /
- 相互作用 /
- 应力强度因子 /
- 水平接触 /
- 奇性分析
Abstract: Using the basic solutions of a single crack and a single inclusion,and making use of the principle of linear superposition of elastic mechanics,the interaction problem between a planar crack and a flat inclusion in an elastic solid is studied.The problem is reduced to solve a set of standard Cauchy-type singular equations.And the stress intensity factors at points of crack and inclusion were obtained.Besides,the singularity for the horizontal contact of crack and inclusion was analyzed.The calculating model put forward can be regarded as a new technique for studying the crack and its expanding caused by inclusion tip.Then several numerical examples are given.
- crack /
- inclusion /
- interaction /
- the horizontal contact /
- singularity analyse /
- stress intensity factor

[1]	Dundurs J.Elastic Interaction of Dislocations with Inhomogeneities[A].In:T Mura Ed.Mathematical Theory of Dislocations[C].T Mura Ed.New York:ASME,1969,70-115.
[2]	Chen Y H,Hahn H G.The stress singularity coefficient at infinite rigid flate inclusion in an orthotropic plane elastic body[J].Engng Fracture Mech,1993,44(3):359-362.
[3]	张明焕.平面与反平面线夹杂力学的工程理论[D].博士毕业论文.上海:上海交通大学,1994.
[4]	范天佑.断裂力学基础[M].南京:江苏科学出版社,1978.
[5]	路见可.解析函数边值问题[M].上海:上海科学出版社,1978.
[6]	Erdogan F.Mixed boundary-value problem in mechanics[A].In:S Nemat-Nasser Ed.Mechanics Today[C].Illinois:Northwestern University,1978,71-73.
[7]	Erodogan F,Gupta G D.Stresses near a flat inclusion in bonded dissimilar[J].International Journal Solids and Structures,1972,8(2):533-547.