[1] |
刘东、陈山林,碟形扁壳在均布载荷下的非线性稳定分析,应用数学和力学,18(1)(1997),29-34.
|
[2] |
Mario Di Viovanni,Flat and Corrugated Diaphtagm Design Handbook,New York and Basel(1989).
|
[3] |
陈山林,浅正弦波纹圆板在均布载荷下的大挠度弹性特征,应用数学和力学,1(2)(1980),261-272.
|
[4] |
Liu Renhuai,Non-Linear bending of a corrugated annular plate with a plane boundary region and a non-deformable rigid body at the center under compound load,Int.J.Non-Linear Mechanics,28(3)(1993),353-364.
|
[5] |
C.Y.Chia,Nonlinear Analysis of Plates,New York(1980).
|
[6] |
王虎、王俊奎,扁圆锥壳在均布载荷作用下的非线性稳定分析,工程力学,7(1)(1990),27-33.
|
[7] |
叶开沅等,在对称线布载荷作用下的圆底扁球壳的非线性稳定问题,兰州大学学报,(2)(1965),10-33.
|
[8] |
J.Tani,Buckling of truncated conical shells under combined axial compression and heating,J.Appl.Mech.,52(2)(1985),402-408.
|
[9] |
C.G.Forster,Axially compression buckling of conical and cylindrical shells,Experimental Mech.,Sept.,(1987),255-261.
|
[10] |
S.Lukasiewicz,et al.,Geometrical analysis of large deformation of axially compressed cylindrical and conical shells,In t.J.Non-Linear Mech.,14(3)(1979),273-284.
|