轴压加筋圆柱壳Koiter-边界层奇异摄动法

孙海虹; 陈铁云

轴压加筋圆柱壳Koiter-边界层奇异摄动法

孙海虹¹,
陈铁云²

1.
武汉交通科技大学, 武汉 430063;
2.
上海交通大学, 上海 200030

详细信息

中图分类号: O34
计量
- 文章访问数: 2223
- HTML全文浏览量: 80
- PDF下载量: 555
- 被引次数: 0
出版历程
- 收稿日期: 1995-10-06
- 修回日期: 1996-10-05
- 刊出日期: 1997-05-15

Koiter-Boundary Layer Singular Perturbtion Method forAxial Compressed Stiffened Cylindrical Shells

Sun Haihong¹,
Chen Tieyun²

1.
Wuhan Transportation University. Wuhan 430063, P. R. China;
2.
Shanghai Jiaotong University, Shanghai 200030, P. R. China

摘要

摘要: 将Koiter理论和奇异摄动理论中的边界层法相结合,处理加筋圆柱壳无因次化非线性边界层型Karman－Donnell方程由分支点和边界层导致的双重奇异性,提出轴压加筋圆柱壳Koiter-边界层奇异摄动法.对AS－2壳分析表明,本方法具有很好的计算效率和计算精度,与数值解相比更能揭示其内在的影响规律.
- 奇异摄动理论 /
- 加筋圆柱壳 /
- 屈曲和后屈曲
Abstract: The double singularities induced by bifurcation point and boundary layer in nondimensionalized nonlinear boundary-layer Karman-Donnell equations for axiallycompressed stiffened cylindrical shells can be treated by Koiter-boundary layersingular perturbation method in this paper.Based on the analysis of AS-2 shell,it is demonstrated that the method hashigh computing efficiency and accuracy and some new conclusions can be directiy obtained from the perturbation formulas.
- singular perturbation theory /
- stiffened cylindrical shells /
- buckling and postbuckling

HTML全文

参考文献(14)

[1]	G.J.Simitses,Buckling and postbuckling of imperfect cylindrical shells:A review,Appl.Mech.Rev.,39,10(1986),1517-1524.
[2]	W.T.Koiter,On the stability of elastic equilibriuw,Ph.D.thesis.NASA TTF-10(1967),833.
[3]	B.Budiansky and J.W.Hutchinson,Dynamics buckling of imperfection-sensitive structures,Proc.XI Inter.Congress Appl Mech.,Springer,Berlin(]964),636-651.
[4]	N.Yamaki,Elastic stability of circular cylindrical shells,North-Holland series,in Appl.Math.& Mech.,Eds.E.Becher et al,North-Holland,Amsterdam,New York Oxford,27(1984).
[5]	J.Arbocz and J.M.A.M.Hol,Koiter's stability theory in a computer-aided engineering(CAE) environment,Int.J.Solids & Structures,26,9/10(1990),945-973.
[6]	F.G.Flroes and L-A.Godoy,Elastic postbuckling analysis via finite element and perturbation techniques,part 1:foundation,Int.J.Nurner.Meth.Engrg,33,9(1992),1175-1794.
[7]	H.H.Shen et al.,Buckling and postbuckling of stiffened cylindrical shells under axial compression,Appl.Math.and Mech.(English Ed.),12(1991),1195-1207.
[8]	沈惠申、周频、陈铁云,加肋圆柱壳在轴压作用下的屈曲和后屈曲,应用数学和力学,12(12)(1991),1127-1140.
[9]	钱伟长,《奇异摄动理论及其在力学巾的应用》,科学出版社(1981).
[10]	J.Arbocz,Collapse load calculations for axially compressed imperfect stringer stiffened shells,Proc.AIAA/ASMElASCE/AHS 25th Structures,Structural Dynamics and Materials Conf.,Part 1,Palm Spring,CA.(1984),130-139.
[11]	J.Arbocz,The effect of initial imperfections on shell stability,Thin-Gl alled Structures:Theory Experiment and Design,Ed.Y.C.Fung and E.E.Sechler,Prentice-Hall,Inc,Englewood Cliffs,N.J.(1972),205-246.
[12]	孙海虹,船舶及海洋工程中圆柱壳结构的屈曲及可靠性,《上海交通大学博士论文》,上海(1994).1-25.
[13]	J.Simitses and D.Shaw,Collapse of axially-loaded,imperfect,cylindrical shells,Proc.AIAAlASMElASCE,tAHS 26th Structures,Structural Dynamics and Materials Conf.,Part 1,Orlands,FL.(1985),139-146.
[14]	V.Tvergaard,On the transition from a diamond mode to an axisymmetric mode of collapse in cylindrical shells,Int.J.Solids Structures,19(1983),845-856.