成形过程数值模拟的非增量时一空算法<sup>*</sup>

柳葆生; 陈大鹏; 刘渝

成形过程数值模拟的非增量时一空算法^*

西南交通大学计算工程科学研究所, 成都610031

基金项目: * 国家自然科学基金

计量
- 文章访问数: 1868
- HTML全文浏览量: 121
- PDF下载量: 474
- 被引次数: 0
出版历程
- 收稿日期: 1996-04-22
- 刊出日期: 1996-11-15

A Non-lncremental Time-Space Algorithm for Numerical Simulation of Forming Process

Research Institute of Computational Engineering Science, Southwest Jiaotong Univesity, Chengdu 610031, P. R. China

摘要

摘要: 本文针对计及几何、材料、接触摩擦等耦合作用的高度非线性的加工成形过程数值模拟和计算分析工作,建议了非增量时-空求解算法。本文的非增量算法,系在整个时间域和空间域上迭代求解,与常见的Newton-Raphson算法明显不同。本文所附算例,进一步说明了本算法的正确性和可行性。
- 成形过程 /
- 数值模拟 /
- 非增量算法 /
- 时-空函数
Abstract: A non-incremental time-space algorithm is proposed for numerical. analysis of forming process with the inclusion of geometrical, material, contact-frictional nonlinearities. Unlike the widely used Newton-Raphson counterpart, the present scheme features an iterative solution procedure on entire time and space domain. Validity and feasibility of foe present scheme are further justiced by the numerical investigation herewith presented.
- forming process /
- numerical simulation /
- non-incremental algorithm /
- time-space function

HTML全文

参考文献(24)

[1]	S. Aita, E. Haug et al., Industrial products formability analysis using 3D sheet metal forming simulation. The 4th Inter. Confe.on Num. Methods in Industrial Forming Processes, ed. by J. L. Chenot, Sophia France: NUMIFORM'92(1992), 571-579.
[2]	G. De. Saxce, Z. Q. Feng and G. Touzot, Rigid-plastic implicit scheme for non- and three-dimensional analysis of metal forming by finite element method, Engineering Computations, 10(1993), 49-60
[3]	L. Penazz, E. Haug, X. M. Ni, O. Fort and E. Di Pasquale, Engineering models of dynamic plasticity and applications to industrial simulation of crash and sheet metal stamping, COMPLA S Ⅲ Conference, Barcelona Spain (1992).
[4]	P. Ladevèze, Sur une famine dalgorthimes en mécanique des structures, C. R. Acad. Science, Paris 300 série Ⅱ, n°2 (1985).
[5]	P. Ladevèze, La methode ã grand increment de temps pour 1'analyse de structures ã comportement non lineaire decrit par variables internes, C. R. Acad. Sciences, Paris 309 sèrie Ⅱ, n°11(1989). 1096-1099.
[6]	P. Ladevèze, Ness advances in the large time increment method, New Advances in Computational Structural Mechanics, ed: by P. Ladeveze and O. C. Zienkiewicz,Elsevier (1992), 3-21.
[7]	P. Boisse, P. Ladevéze. M. Poss and P. Rougee. A new large time increment algorithm for anisotropic plasticity, Communication L. U. T. A. M./L. C. M-Symposium Yielding Damage an Failure of Anisotropic Solids, Grenoble(1987).
[8]	P. Boisse, Nouvel algorithme a grand incrément de temps pour 1e calcul des structures elasto-plastiques, Thése de Doctorat de 1'Universite Paris VI (1987).
[9]	P. Boisse, P. Bussy and P.Ladevéze, A new approach in non linear mechanics: the large time increment method, Int. J. for Num. Meth., 29 (1990), 647-663.
[10]	J. Y. Cognard, Une nouvelle approche des problemes de plasticité, et de viscoplasticité: Laméthode ã grand increment de temps, Thèse de Doctorat, Université Paris VI(1989).
[11]	J. Y. Cognard and P. Ladeveze, A large time increment approach for cyclic viscoplasticity, Int. Journal of Plasticity, 9 (1993), 141-157.
[12]	B. S. Liu. Simulation numérique de 1'emboutissage, méthode a grand incrément de temps, Thèse de Doctorat. Paris Université Paris 6(1992).
[13]	P. Bussy, S. B. Liu and P. Vauchez, Numerical simulation of metal forming processes: The lagre time increment method, Second Word Congress on Computdtional Mechanics: Inter. Asso: of Compu. Mechanics (1990), ed. by I. S. Doltsinis, 834-837.
[14]	P. Bussy and B. S. Liu. Utilisation de la méthode ã grand incrément de temps pour la simulation numérique de 1'emboutissage, 10' Congrès Franeais de Mecanique, ed. by J. Lemaitré. Paris(1991),125-129
[15]	柳葆生,P, Bussy, P, Vauchez,金属板件冲压过程的数值模拟,西南交通大学学报,29,(5) (1994),500-505
[16]	B. S. Liu, Prise en compte du contact dans la simulation numerique de 1'emboutissage, Memoire de DEA. option CAO et Structure, Universile Paris VI (1998).
[17]	P. Bezier, Courbes et Surface, Mathématiques et CAO, 2° édition, Hermes(1987).
[18]	P. Bossy, B. S. Liu and P. Vauchez, New algorithm for numerical simulation of metal forming process, The 4th Inter. Conference on Numerical Methods in Industrial Forming Processes, ed. by J. L. Chenol, Sophia France:NUMIFORM'92(1992), 433-438.
[19]	柳葆生,P.Bussy,冲压过程数值模拟的接触与摩擦关系数值方法,固体力学学报,16(1),(1995).79一78
[20]	J. Lemaitre and J. L. Chaboche, Mecanique des Matericmx Solids, Bordas, Paris(1985).
[21]	P. Bossy, Optimisation et fiabilité des calcus par élèments finis en non linéarité géométrique, Thèse de Doctor Ingenieur, Université Paris VI(1984).
[22]	F. Mehrez, Modclisation du Contact-Frottcment dens la simulation numerique do 1'emhoutissage des toles, Those de Doctorat, Universite do Paris 6(1991).
[23]	M. Raous, P. Chabrand and F. Lebon, Numerical methods for solving unilateral contact problems with friction, Num. Mech. in Contact Mech., n° Special J. Mee. Th. Appl.(1988).
[24]	柳葆生,用大时间增量方法求解板件冲压过程的数值模拟,中国机械工程学刊,5 (1995),79-82