带裂纹层合板能量释放率分析
Analysis of Energy Release Rate for Cracked Laminates
-
摘要: 为了进一步了解裂纹尖端应力场的特性,本文对复合材料层合板的界面裂纹作了分析.文中强调了能量释放率分量存在的条件,并给出能量释放率分量和应力强度因子间的关系式.结合经典板理论的分析结果,根据外荷作用及某些几何参数和材料多数,导出了一般复合材料层合板的应力强度因子的封闭形式解.为了得到在一般荷载条件下能量释放率的分量,必须分别确定模型混合参数Ω,文中讨论了确定参数Ω的方法,最后,应用本文方法于几种不同种类的复合材料层合板,证明其结果可应用于工程实践.Abstract: An interface crack analysis is presented for further understanding the characteristics of the crack-tip field.The conditions under which the energy release rate components would exist are emphasized and the relations between energy release rate components and the stress intensity factors are given.Combining with the results of chasical plate theory analysis.a closed-form solution for stress intensity factors in terms of external loading as well as some geometric and material parameters for fairly general composite laminates is derived Then.an analytical solution for energy release rate components is deduced.In order to get energy release rate components under general loading condition.a mode mix parameter,Ω,must be determined separately.A methodology for determining Ω is discussed.Finally.several different kinds of laminates are examined and the results obtained could be used in engineering applications.
-
Key words:
- composite materials /
- laminates /
- crack-tip field /
- energy release rate /
- stress intensity factor /
- interface crack
-
[1] Z.Suo,G.Bao,B.Fan and T.C.Wang,Orthotropy rescaling and implications forfracture in composites.Int.J.Solids Structure,28(1991),235-248. [2] T.K.O'Brien,Generic aspects of delamination in fatigue of composite materials,J.Am.Helicopter Soc..32(1987),13-18. [3] A.Hoenig,Near-tip behavior of a crack in a plane anisotropic elastic body,Engineering Fract.Mech.,16(1982),393-403. [4] J.W.Eischen,Fracture of nonhomogeneous materiais,Int.J.Flacture,34(1987),3-22. [5] M.L.Williams,The stresses around a fault or crack in dissimilar media,Bull.Seism.Soc.Am.,49(1959),199-204. [6] H.Gao,M.Abbudi and D.M.Barnett,Interfacial crack-tip field in anisotropic elasticsolids J.Mech.Phys.Solids,40(1992),393-416. [7] K.C.Wu.Stress intensity factor and energy release rate for interfacial cracks between dissimilar anisotropic materials.ASME,J.Appl.Mech.,57(1990),882-886. [8] K.C.Wu,Explicit crack-tip fields of an extending interface crack in an anisotropic bimaterial,Int.J Solids Struct.,27(1991),455-466. [9] Z.Suo,Singularities,interfaces and cracks in dissimilar anisotropic media,Proc.R.Soc.Lond.,A427(1990),331-358. [10] J.L.Bassani and J.Qu,Finite crack on bimaterial and bicrystal interfaces,J.Mech.Phys.Solids,37(1989),435-453. [11] J.Qu.and J.L.Bassani,Cracks on bimaterial and bicrystal interfaces,J.Mech.Phys.Solids.,37(1989),417-433. [12] T.C.T.Ting.,Interface cracks in anisotropic bimaterials,J.Mech.Phys.Solids,38(1990),505-513. [13] T.C.T.Ting,Explicit solution and invariance of the singularities at an interface crackin anisotropic composite,Int.J.Solids Struct.,22(1986),965-983. [14] S.S.Wang,Fracture mechanics for delamination problems in composite materials,J.Composile Materials.17(1983),210-223. [15] J.R.Willis.Fracture mechanics of interfacial cracks.J.Mech.Phys.Solids,19(1971),353-368. [16] J.W.Hutchinson.M.E.Mear and J.R.Rice,Crack paralleling an interface between dissimilar materials,ASME.J.Appl.Mech..54(1987),828-832. [17] A.H.England,A crack between dissimilar media,J.Appl.Mech.,32(1965),400-402. [18] J.R.Rice and G.C.Sih,Plane problems of cracks in dissimilar media,J.Appl.Mech..33(1965),418-423. [19] J.R.Rice,Elastic fracture mechanics concepts for interfacial cracks,ASME.J Appl.Mech.,55(1988),98-103. [20] G.C.Sih,P.C.Paris and G.R.Irwin,On cracks in rectilinearly anisotropic bodies,Int.J.Fracture Mech.,1(1965),189-203. [21] J.G.Williams,On the calculation of energy release rates for cracked laminates,Int.J.Fracture,36(1988),101-119. [22] Z.Suo and J.W.Hutchinson,Interface crack between two elastic layers.Int.J.Fracture.,43(1990),1-18. [23] Z.Suo.,Delamination specimens for orthotropic materials,ASME,J.Appl.Mech.,57(1990),627-634. [24] R.A.Schapery and B.D.Davidson,Prediction of energy release rate for mixed-mode delamination using classical plate theory,Applied Mechanics Review,43,2(1990),S281-S287. [25] B.D.Davidson,H.Hu and R.A.Schapery,An analytical crack tip element for layered elastic structures,J.Appl.Mech. [26] J.Dundurs,Mathematical Theory of Dislocations.ASME,(1969),70-115. [27] R.M.Jones,Mechanics of Composite Materials,McGraw-Hill,New York(1975). [28] M.Y.He and J.W.Hutchinson,Kinking of a crack out of an interface,J.Appl.Mech.,56(1989),270-278. [29] J.W.Hutchinson,Mixed mode fracture mechanics of interfaces,Metal-Ceramic Interfaces,ed.by M.Ruhle,A.G.Evans,M.F.Ashby and J.P.Hirth,Pergamon Press,New York(1990). [30] B.D.Davidson,Prediction of energy release rate for dege delamination using a crack tipelement,Presented at the Fifth ASTM Symposium on Composite Materials:Fatigue and Fracture,Atlanta,Georgia,May 4-6(1993). [31] I.S.Raju.,J.H.Crews,Jr.and M.A.Aminpour,Convergence of strain release ratecomponents for edge-delaminated composite laminates,Engineering Fract.Mech.,30(1988),383-396. [32] B.D.Davidson and H.Hu,A technique to define mixed mode energy release rate at dissimilar interfaces in fiber reinforced,laminated materials,to be submitted to Int.J.of Fracture.
点击查看大图
计量
- 文章访问数: 2572
- HTML全文浏览量: 62
- PDF下载量: 497
- 被引次数: 0