等腰三角形管道进口段流动阻力研究

祝世兴; 王致清

等腰三角形管道进口段流动阻力研究

哈尔滨工业大学

计量
- 文章访问数: 2066
- HTML全文浏览量: 107
- PDF下载量: 666
- 被引次数: 0
出版历程
- 收稿日期: 1990-12-21
- 刊出日期: 1993-09-15

A Study on Flow Resistance in the Entrance Region of Isosceles Triangular Ducts

Jiamusi Institute of Technology;

摘要

摘要: 本文首先利用Л.В.Канторович变分方法求出了等腰三角形管道不可压缩流体层流完全发展段流动速度的变分解,并且给出了压力损失的理论计算值与实验值.继而,本文推求出适用于各种顶角的等腰三角形管道进口段流动的速度分布模型和附加压力损失系统以及进口段长度计算方法.并对两种顶角(2α=45.1°,60°)的等腰三角形管道进口段流动进行了具体计算和实验.本文的理论分析与其他作者的理论分析比较表明,本文的分析结果具有很高的精度和广泛的实用性,并与作者的实验结果吻合较好.
- 层流 /
- 进口段 /
- 速度分布 /
- 压力损失 /
- 进口段长度
Abstract: In the present paper the variational solution of velocity profile for an incompressible laminar and fully developed flow in isosceles triangular ducts is derived by applying the Kantovorich method. The theoretical and experimental results of pressure loss are also given. The velocity distribution model, additional pressure loss coefficient and calculating method of inlet length in the entrance region of isosceles triangular ducts are also derived, which are suitable for various kinds of vertex angles. The calculations and experiments are also performed for two models:the isosceles triangular channels with vertex angles 2a=45.1°and 2a=60°. Comparisons are made between the theoretical analysis in this paper and those of the other authors. It can be seen that the present analytical result is of high, accuracy and wide practicability, and agrees well with the authors' experiment.
- laminar flow /
- entrance region /
- velocity distribution /
- pressure loss /
- entrance length

HTML全文

参考文献(13)

[1]	朗道、栗弗席兹著.《流体力学》,上册(中文版),高等教育出版社.
[2]	Sparrow,E.M.,Laminar flow in isosceles triangular ducts,AICHE J.,8(1962),599-604.
[3]	Han,L.S.,and A.L.Cooper,Approximate solutions of two internal flow problems—solutions by an integral method,Proc.4th U.S.National Congress Appl.Mech.,ASME,2(1962),1269-1278.
[4]	Lundgren,T.S.,E.M.Sparrow and J.B.Sfarr,Pressure drop to the entrance region in ducts of arbitrary cross section,J.Basic Eng.,Trans.ASME,Series D,86(1964),620-626.
[5]	Miller,R.W.and L.S.Han,Pressure losses for laminar flow in the entrance region of ducts of rectangular and equiluteral triangular cross section,J.Appl.Mech.,Trans.ASME,(1971),1083-1087.
[6]	Fleming,D.P.and E.M.Sparrow,Flow in the hydrodynamic entrance region of ducts of arbitrary cross section,J.Heat Transfer,Trans.ASME,91(1969),345-354.
[7]	Richard,C.C.and W.H.Richard,Transitional flow in isosceles triangular ducts,Ind.Chem.Fundm.,11(1972).
[8]	Carlson,L.W.and Jr.T.F.Irrine,Fully developed pressure drop in triangular shaped ducts,J.Heat Transfer,(1961),441-444.
[9]	Mohanty,A.K.and S.B.L.Asthana,Laminar flow in the entrance region of a smooth pipe,J.Fluid Mech.,90(1978),433-446.
[10]	钱伟长著,《变分法及有限元》,科学出版社.
[11]	Sparrow,E.M.and S.H.Lin,Flow development in the hydrodynamic entrance region of tubes and ducts,Phys.Fluids,7(1964),338-347.
[12]	Schiller,L.,Die Entwieklung der laminaren Gesech-Windigkeitverteilung under ihre Bedenfung fur Zahigkeitmessumgen,ZAMM,2(1922),96.
[13]	McComas,S.T.,Hydrodynamic entrance lengths for ducts of-arbitrary cross section,J.Basic Eng.,Trans.ASME,Series D,89(1967),847-850.