非均匀Reissner板弯曲的精确元法

纪振义

非均匀Reissner板弯曲的精确元法

纪振义

安徽建筑工业学院

计量
- 文章访问数: 1718
- HTML全文浏览量: 54
- PDF下载量: 521
- 被引次数: 0
出版历程
- 收稿日期: 1989-09-16
- 刊出日期: 1991-11-15

An Exact Element Method for the Bending of Nonhomogeneous Reissner’s Plate

Ji Zhen-yi

Anhui Architectural Industry College, Hefei

摘要

摘要: 本文在阶梯折算法和精确解析法的基础上,提出构造有限元的新方法——精确元法.该方法不用变分原理,可适用于任意变系数正定和非正定偏微分方程.利用该方法,得到Reissuer板弯曲的一个非协调单元,它具有十五个自由度.由于节点位移参数仅含有挠度和转角,因此处理任意边界条件非常容易.文中给出证明,位移和内力均收敛于精确解.由精确元法所得到的单元不仅能用于厚板,也可用于薄板.文末给出四个算例.算例表明,利用本文的方法,可获得满意的结果,并有较高的数值精度.
- 精确元法 /
- 厚板 /
- 非协调元
Abstract: In this paper, based on the step reduction method and exaet analytic method, a new method, theexacl element method for constructing finite element, is presented. Since the near method doesn't need varialional principle, it can he applied to solve nun-positive and positive definite partial differcntial equations with arbitral varutble coefficients. By this method, a triangle noncompatible element with 15 degrees of freedom is derived to solve the bending of nonhomogenous Reissner's plate. Because the displacement parameters at the nodal point only contain deflection and rotation angle, it is convenient to deal with arbitrary boundary conditions. In this paper, the convergcnce of displacement and stress resultants is proved. The element obtained by the present method can be used for thin and thick plates as well, hour numerical examples are given at the end of this paper, which indicates that we can obtain satisfactory results and have higher numerical precision.
- thick plate /
- exact finite element method /
- incompatible element method

HTML全文

参考文献(14)

[1]	Zienkiewicz.O.C.,R.L.Taylor and J.M.Too,Reduced integration techniques in general analysis of plates and shells,Int.J.Num.Meth.Engng.3(1971),275-290.
[2]	Zienkiewicz,O.C.and E.Hinton,Reduced integration,function smoothing and nonconformity in finite element analysis-finite element methods in engineering.Journal of the Franklin Institute,302,5/6(1976),443.
[3]	Hughes,T.J.R.,M.Cohen M.Haron,Reduced and selective integration techniques in the finite element analysis of plates,Nucl.Eng.Des.,46(1978),203.
[4]	Pryor.C.W.et al.,Finite element bending analysis of Reissner plates,J.Eng.Mech.Div.ASCE,96(1970),967-983.
[5]	Rao.G.V.et al.,A high precision triangular plate bending element for the analysis of thick plate.Nucl.Eng.Des.,30(1974),408-412.
[6]	Wu Chang-chun,Some problems of plate bending hybrid model with shear effect,Int.J.Num.Meth.Engng.,18(1982),755-764.
[7]	Venkateswara Rao,G.,J.Venkateramana,K.Kanaka Raju,Stability of moderately thick rectangular plates using a high precision triangular element,Computers and Structures,5,4(1975),257.
[8]	叶开沉,非均匀变厚度弹性力学的若干问题的一般解,Ⅳ,非均匀变厚度梁的弯曲、稳定和自由振动,兰州大学学报,力学专号,1(1)(1979), 133- 157,
[9]	纪振义、叶开沅,任意变系数微分方程的精确解析法,应用数学和力学,10(10) (1989).
[10]	Wëën.F.Vander Application of the boundary integral equation method to Reissner's piate model.Int.J.NUM.Meth.Engng.,18(1982),1-10.
[11]	Hood,P.,Frontal solution program for unsymmetric matrices,Int.J.Num.Meth.Engng.,10(1976),379-399.
[12]	Salerno,V.L.and M.A.Goldberg,Effect of shear deformation on bending of rectangularplate,J.Appl.Mech.,27(1960).
[13]	中国科学院北京力学所固体力学研究室板壳组,《夹层板的弯曲、稳定和振动》,科学出版仕,北京(1977), 39.
[14]	Reissner,E.The effect of transverse shear deformation on the bending of elastic plates,J.Appl.Mech.,12(1945),69-77．