拓扑方法在叶栅三元流动分析中的应用(Ⅱ)——表面摩擦力矢量场和截面流线矢量场图画的拓扑分析<sup>*</sup>

康顺; 王仲奇

拓扑方法在叶栅三元流动分析中的应用(Ⅱ)——表面摩擦力矢量场和截面流线矢量场图画的拓扑分析^*

康顺,
王仲奇

哈尔滨工业大学

基金项目: * 国家自然科学基金资助项目

计量
- 文章访问数: 1828
- HTML全文浏览量: 86
- PDF下载量: 615
- 被引次数: 0
出版历程
- 收稿日期: 1989-04-21
- 刊出日期: 1990-12-15

An Application of Topological Method to Analysing the Three-Dimensional Flow in Cascades(Ⅱ)—— Topological Analysis on the Vector Field Patterns of Skin-Frictions and Section Streamlines

Harbin Institute of Technology, Harbin

摘要

摘要: 文中应用拓扑分析的方法,分别绘制了在特定工况下压气机叶栅和透平叶栅的表面摩擦力线圈,以及弯管横截面和透平叶栅横截面的二次流场流线图.分析了叶栅三元粘性流场中的旋涡结构.
- 拓扑分析 /
- 分离流 /
- 三元流 /
- 显示 /
- 透平 /
- 压气机 /
- 旋涡
Abstract: With an application of topologial analysis,in this paper the skin-friction line patterns on compressor and turbine cassade surfaces are depicted and the streamline patterns of the secondary flow fields in the cross section of a curved pipe and a turbine cascade are drawn under given conditions.In addition the structures of vortices within three-dimensional viscous flow fields in cascades are analysed.
- topological analysis /
- separation flow /
- three-dimentional flow /
- visua-lization /
- turbine /
- compressor /
- vortex

HTML全文

参考文献(20)

[1]	Sears,W.R.,The boundary layer of yawed cylinders,J.of Aerospuce Sciences.15,1,Jan.(1948),49-52.
[2]	Legendre,R.,Lignes de conrant d'un ecoulement countinu,Lu Recherche Ae 'rospatiale,105(1965),3-9.
[3]	Lighthill,M.J.,Attachment and separation in three-dimensional flow,Section two 2-6.Laminar boundary layers,Ed.by Rosenhead,Oxford Univ.Press(1963),72-82.
[4]	Hunt,J.C.R.,C.J.Abell,J.A.Peterka and H.Woo,Kinematical studies of the flows around free or surface-mounted obstacles;applying topology to flow visualization,J.Fluid Mechanics,86,1(1978),179-200.
[5]	Wang,K.C.,Separation of three-dimensional flow,Reviews in Viscous Flow,Proc.Lockheed-Georgia Co.Symp.,LG 77ER00 44,341-414.
[6]	Tobak,M.and D.J.Peake,Topology of three-dimensional separated flows,Ann.Rev.Mech.14(1982),61-85.
[7]	张涵信,分离线上的奇点以及分离线的形态,空气动力学学报,5,1(1987),1-10.
[8]	Yoshida,T.,Application of flow visualization to aerospace laboratory,Proceedings of the First China-Japan Symposium on Flow Visualizaton,Peking Univ.Press,Beijing,China.(1988),1-6.
[9]	Schulz,H.D.and H.E.Gallus,Experimental investigation of the three-dimensional flow in an annular compressor cascade,ASME Paper 88-GT-201.
[10]	Sieverdjng,C.H.,Recent progress in turbine blade passages,J.of Gas Power,107,April(1985),248-257.
[11]	Ishii,J.and S.Honami,A three-dimensionalturbulentdetached flow with a horseshoe vortex,J.of Bng.Jor Gas Turbines and Power,108,Jan.(1986),125-130.
[12]	康顺、王仲奇、徐文远,透平叶栅流场的彩色氦气泡显示研究,中国工程热物理第六届年会论文,上海,NO85-20(1985).
[13]	Gaugler,R.E,and L.M.Russell,Flow visualization study of the horseshoe vortex in a turbine stator cascade,NASA Technical Paper,N82-30498,June(1982).
[14]	Marchel,P.and C.H.Sieverding,Secondary flow within turbomachinery bladings,Secondury Flows in Turbomachines,AGARD CP 214(1977).
[15]	Langston,L.S.,M.L.Nice and R.M.Hooper,"Three-dimensional flow within a turbine blade passage,ASME J.of Eng.for Power.99,1,Jan.(1977),21-28.
[16]	Klein,A.,Investigation of the entj y boundary layer on the secondary flows in the blading of axial turbine,BHRA T1004(1966).
[17]	Sonada,T.,Experimental investigation on spatial development of streamwise vortices in a tujbine inlet guide vane cascade,ASME Paper 85-GT-20(1985).
[18]	Sjolander,S.A.,The endwall boundary layer in an annular cascade to turbine nozzle guide vanes,Carleton V.,Canada,TR ME/A 75-4.
[19]	Moustapha,S.H.,G.J.Parbn and J.H.T,Wade,Secondary flow in cascade of highly loaded turbine blades,ASME Paper 85-GY-135.
[20]	Sumida,M.,K.Svdov and A.Yuhara,Visualizationofflow through curved pipes,Truns.of the Japan Society.of Mech.Engineers,Paper No.87-03788,297-301.