压力旋流喷射雾化的喷雾角特性之探讨
Study on the Characteristic of the Spray Angle in Pressure Swirl Spray Atomisation
-
摘要: 本文根据提出的旋流喷射锥膜雾化理论,由旋流喷射的作用力关系,求导出压力旋流喷射雾化的喷雾角特性关系式:θ=tg-12·(1-φ) 并将各种喷雾角关系式同实验数据进行比较。结果表明:本文所导出的喷雾角关系式与实验数据有较好的接近,而且计算式也较简单,有一定的实用价值。Abstract: Based on the suggested atomisation theory for the swirl spray conical film, the formula for the spray angle characteristic of pressure swirl spray atomisation θ=tg-12·(1-φ) is derived from the relation of acting forces in swirl spray.The spray angle characteristics of swirl spray are worked out with various formulas and compared with actual test data. The results show that the derived formulas for spray angle in this article agree comparatively well with the results from experiments, and that the expressions are simple. They are of definite value in practice.
-
[1] 鲁定远,压力旋流喷雾理论与喷雾粒度特性的探讨,上海纺织工业设计院(1979). [2] 西安热工研究所,电厂锅炉机械雾化油喷咀冷态试验,热力发电,7 (1976). [3] 电厂燃油设计编写组,《电厂燃油设计》,湖北省申力设计院(1975). [4] Giffen,E.and A.Maraszen,The Atomisation of Liquid Fuels(1953). [5] Weber,G.,Burner of presses atomisation for oil fired boiler of middle and great size,VGB H106(1967),1.(in German) [6] 岩下想吉(日本)重油心ーナの燃烧特性しニ及ほず各因子の影响,火力发电,18.3(1967),29. [7] 热管理便览编写组(日本),《热管理便览—燃烧器》(昭和38年). [8] ПрохоВ А.М.,О Новом налравлении в теории центробежный форсунок,Теnлознеремuка,2(1963),26-30. [9] Морошкин М.Я.,Расчёт угла факела п толщины пленка на ва выходе из дитробежных форсунок,Теnлозлеремuка,9(1969),88. [10] Морошкин М.Я.,Расчёт центробежных форсунок,Знереmuчесное Машuносmроенuе,3(1966). -
计量
- 文章访问数: 1771
- HTML全文浏览量: 82
- PDF下载量: 560
- 被引次数: 0
下载:
渝公网安备50010802005915号