Analytical Solution of Bending-Compression Column Using Different Tension-Compression Modulus
-
摘要: 依据不同模量弹性理论用流动坐标系及分段积分法导出复合荷载作用下弯压柱的解析解，建立了中性轴、应力、应变、位移的计算公式，并编制相应的有限元程序进行计算，与解析解进行误差对比．最后对不同模量计算结果与经典力学同模量计算结果进行分析对比，得出两种理论计算结果的差异，并提出对该类结构计算的合理建议．Abstract: Based on elastic theory of different tension-compression modulus,the analytical solution was presented for bending-compression column subject to combined loadings by the flowing coordinate system and phased integration method.The formulations for the neutral axis,stress,strain and displacement were developed,the finite element program was compiled for calculation,and the comparison between the result of finite element and analytical solution were given too.Finally,the results of different modulus and the same modulus are compared and analyzed,the difference of the two theories in result is obtained,and the reasonable suggestion for the calculation of this structure is proposed.
-
Key words:
- different modulus /
- analytical solution /
- neutral axis /
- bending-compression column
-
[1] Medri G. A nonlinear elastic model for isotropic materials with different behavior in tension and compression[J].Transactions of the ASME,1982,26(104):26—28.[WT5”BZ]. Амбарцумян С А.不同模量弹性理论[M].邬瑞锋，张允真 译.北京：中国铁道出版社，1986. [3] Srinivasan R S，Ramachandra L S.Large deflection analysis of bimodulus annular and circular plates using finite elements[J].Computers & Structures,1989,31(5):681—691. [4] Srinivasan R S, Ramachandra L S. Axisymmetric buckling and post-bucking of bimodulus annular plates[J].Eng Struct,1989,11(7):195—198. doi: 10.1016/0141-0296(89)90007-2 [5] 张允真，王志锋.不同模量弹性力学问题的有限元法[J]，计算结构力学及其应用，1989，6(1):236—246. [6] Papazoglou J L, Tsouvalis N G.Mechanical behaviour of bimodulus laminated plates[J].Composite Structures,1991,17(1):1—22. doi: 10.1016/0263-8223(91)90057-6 [7] 杨海天，邬瑞锋，杨克检，等.初应力法解拉压双弹性模量问题[J].大连理工大学学报，1992，32（1）:35—39. [8] TSENG Yi-ping,LEE Cheng-tao.Bending analysis of bimodular laminates using a higher-order finite strip method[J].Composite Structures,1995,30(4):341—350. doi: 10.1016/0263-8223(94)00048-4 [9] YE Zhi-ming.A new finite element formulation for planar elastic deformation[J].Int J Numerical Methods in Engineering,1997,14(40):2579—2592. [10] TESENG Yi-ping,JIANG Yu-ching.Stress analysis of bimodular laminates using hybrid stress plate elements[J].International Journal Solids Structures,1998,35(17):2025—2028. doi: 10.1016/S0020-7683(97)00170-4 [11] 刘相斌,张允真.拉压不同模量有限元法剪切弹性模量及加速收敛[J].大连理工大学学报,2000,40(5):527—530. [12] YE Zhi-ming,YU Huang-ran,YAO Wen-juan.A finite element formulation for different Young's modulus when tension and compression loading[A].In:Jin Ho Kwak Ed.Com2Mac Conference on Computational Mathematics[C].South Korea: Pohang University of Science and Technology,2001,2—5. [13] Raffaele Zinno, Fabrizio Greco.Damage evolution in bimodular laminated composites[J].Composite Structures,2001,53(4):381—402. doi: 10.1016/S0263-8223(01)00048-4 -
点击查看大图
计量
- 文章访问数: 2434
- HTML全文浏览量: 101
- PDF下载量: 1030
- 被引次数: 0
下载:
