建筑用夹蕊板条的分析、数值和实验研究

张建平; 张佑啟; 谭国焕

建筑用夹蕊板条的分析、数值和实验研究

1.
美国怀渥明大学土木工程系;
2.
香港大学土木工程系

计量
- 文章访问数: 1929
- HTML全文浏览量: 123
- PDF下载量: 472
- 被引次数: 0
出版历程
- 收稿日期: 1985-10-21
- 刊出日期: 1987-02-15

Analytical, Numerical and Experimental Investigations of Architectural Sandwich Panels

1.
Department of Civil Engineering, University of Wyoming, Laramie, WY, USA;
2.
Department of Civil Engineering, University of Hong Kong, Hong Kong

摘要

摘要: 由冷成型的薄壁钢面和刚性泡沫绝缘蕊子所组成的建筑用夹蕊板条,用来作为多功能建筑隔墙,日益普遍.本文总结了十多年来的研究工作,阐明了包括弯曲应力、挠度、弯曲折皱、轴向稳定、热应力以及振动在内的各种结构性能.研究中,采用了分析法(边界值法)、数值法(有限样条法、有限层法和有限棱柱体法等)以及实验法(全尺寸实物试验),写出了关键方程,并对各法所得结果进行了比较研究.

Abstract: Architectural sandwich panels with thin-walled cold-formed steel facings and rigid foamed insulating core are becoming more and more popular as enclosures for system buildings. In this paper, the structural behavior, including flexural stresses/deflections, flexural wrinkling, axial stability, thermal stresses and vibration, is presented, summarizing more than a decade of research. Methods used are analytical (boundary-valued approaches), numerical (finite-strip, finite-layer, finite prism approaches) and experimental (full-scale testings). Key equations are formulated, and results by different methods are compared.

HTML全文

参考文献(30)

[1]	Allen,H.G,Analysis and Design of Structural Sandwich Panels,New York,Pergamon Press,Inc.(1969).
[2]	Gough,C.S.,C.F.Elam and N.A.de Bruyne,The stabilization of a thin sheet by a continuous supporting medium,Journal of the Royal Aeronautical Society,44,12-43.
[3]	Hoff,N.J.and S.E.Mautner,The buckling of sandwich-type panels,Journal of the Aeronautical Sciences.12,(1956),285-297.
[4]	Chong,K.P.and J.A.Hartsock,Flexural wrinkling mode of elastic buckling in sandwich panels,Proceedings of ASCE Specialty Conference on Composite Materials,Pittsburgh,PA(1972).
[5]	Chong,K.P.and J.A.Hartsock,Flexural wrinkling in foam-filled sandwich panels,J Engr.Mech.Div,ASCE(1974),95-110.
[6]	Chong,K.P.,K.A.Wang and G.R.Griffith,Analysis of continuous sandwich panels in building system,Building and Environment,14(1979),125-130.
[7]	Hartsock,J,A.and K.P.Chong,Analysis of sandwich panels with formed faces,Journal of the Structural Division,ASCE,102.ST4,Proc.Papar 12058(1976),803-819.
[8]	Tham,L.G,K.P.Chong and Y.K.Cheung,Flexural bending and axial compression of architectural sandwich panels by combined finite-prism-strip method,J.Reinforced Plastics and Composite Materials,1(1980),16-28.
[9]	Chong,K.P,K.O.Engen and J.A.Hartsock,Thermal stress in determinate and indeterminate sandwich panels with formed facings,ASCE-EMD First Specialty Conference,Waterloo,Canada(1976).
[10]	Chong,K.P.,K.O.Engen and J.A.Hartsock,Thermal stress and deflection of sandwich panels,J.Structural Divison,103,ST1(1977),35-49.
[11]	Chong,K.P.,L.G.Tham and Y.K.Cheung,Thermal behavior of foamed sandwich plate by finite-prism-strip mathod,Computers and Structures,15,3(1982),321-324.
[12]	Chong,K.P.,B.Lee and P.A.Lavdas.Analysis of thin-walled structures by finite strip and finite layer methods,Thin-Walled Structures,2(1984),75-95.
[13]	Cheung,Y.K.,K.P.Chong and L.G.Tham,Buckling of sandwich plate by finite layer method,Cmputers and Structure,15,2(1982),131-134.
[14]	Chong,K.P.,Y.K.Cheung and L.G.Tham,Free vibration of foamed sandwich panel,J Sound and Vibration,81,4(1982),575-582.
[15]	Kuenzi,E.W.,Structural Sandwich Design Criteria,National academy of sciences-national research council,Publication 798(1960),9-18.
[16]	ASCE Subcommittee on Literature Survey of Cold-Formed Structures(K.P.Chong,Chairman),Literature Survey of Cold-Formed Structures.Preprint 3762,ASCE Convention,Atlanta,Oct.(1979).
[17]	Harris,B.J.and G.M.Nordby,Local failure of plastic-foam core sandwich panels,Journal of the Structural Division,ASCE,95,ST4,Proc.Paper 6494(1969),585-610.
[18]	Timoshenko,S.and J.N.Goodier,Theory of Elasticity,Chapts.2 and 3,2nd ed.,McGraw-Hill Book Co.,Inc.,New York,NY(1951).
[19]	von Kármán,T.and M.A.Biot,Mathematical Methods in Engineering,Ist ed.,McGraw-Hill Book Co.,Inc.,New York,NY(1940),304.
[20]	Sokolnikoff I.S.,Mathematical Theory of Elasticity,2nd ed.,McGraw-Hill Book Co.,Inc.,New York,NY(1956),249-262.
[21]	Hartsock,J.A.,Design of Foam-Filled Structures,Technonic Publishing Co.,Stamford,CT(1969).
[22]	Zienkiewicz,O.C.and Cheung,Y.K.,The Finite Element Method in Structural and Continuum Mechanics.McGraw-Hill(1967).
[23]	Cheung,Y.K.,Finite strip method in the analysis of elastic plates with two opposite simply supported ends,Proc.Institution Civil Engineers,40(1968),1-7.
[24]	Cheung,Y.K.,Finite strip method analysis of elastic slabs,Journal of Engineering Mechanics,ASCE,94,EM6,(1968),1365-1378.
[25]	Cheung,Y.K.,Finite Strip Method in Structural Analysis,Pergamon Press(1976).
[26]	Cheung,Y.K.,M.F.Yeo and D.A.Cumming,Three-dimensional analysis of flexible pavements with special reference to edge loads,Proc.Ist Conf.of the Road Engineering Assoc.of Asia and Australia.Bangkok(1976).
[27]	Cheung,Y.K.,Finite strip method in structural and continuum mechanics,Int'L Journal of Structures,1,1(1981),19-37.
[28]	Cheung,Y.K.,L.G.Tham and K.P.Chong,Buckling of sandwich plate by finite layer method,Computers and Structures,15,2(1982),131-134.
[29]	Ahmed,K.M.,Free vibration of curved sandwich panels by the method of finite elements,Tournal of Sound and Vibratipn,18 (1971),61-74.
[30]	中国科学院固体力学组,《夹蕊板条的弯曲、稳定和振动》,北京(1977).