| [1] |
Kim S, Clark W W, Wang Q M.Piezoelectric energy harvesting with a clamped circular plate: analysis[J].Journal of Intelligent Material Systems and Structures,2005,16(10):847-854. doi: 10.1177/1045389X05054044
|
| [2] |
Yoon H S,Washington G, Danak A. Modeling, optimization, and design of efficient initially curved piezoceramic unimorphs for energy harvesting applications[J].Journal of Intelligent Material Systems and Structures,2005,16(10):877-888. doi: 10.1177/1045389X05055759
|
| [3] |
Ng T H, Liao W H. Sensitivity analysis and energy harvesting for self-powered piezoelectric sensor[J].Journal of Intelligent Material Systems and Structures,2005,16(10):785-797. doi: 10.1177/1045389X05053151
|
| [4] |
Mateu L, Moll F. Optimum piezoelectric bending beam structures for energy harvesting using shoe inserts[J].Journal of Intelligent Material Systems and Structures,2005,16(10):835-845. doi: 10.1177/1045389X05055280
|
| [5] |
Ha S K. Analysis of the asymmetric triple-layered piezoelectric bimorph using equivalent circuit models[J].J Acoust Soc Amer,2001,110(2):856-864. doi: 10.1121/1.1387090
|
| [6] |
Sodano H A, Park G, Inman D J. Estimation of electric charge output for piezoelectric energy harvesting[J].Strain,2004,40(2):49-58. doi: 10.1111/j.1475-1305.2004.00120.x
|
| [7] |
Roundy S, Wright P K.A piezoelectric vibration based generator for wireless electronics[J].Smart Materials and Structures,2004,13(5):1131-1142. doi: 10.1088/0964-1726/13/5/018
|
| [8] |
Jiang S N, Li X F, Guo S H,et al.Performance of a piezoelectric bimorph for scavenging vibration energy[J].Smart Materials & Structures,2005,14(4):769-714.
|
| [9] |
Lefeuvre E, Badel A, Richard C,et al.Piezoelectric energy harvesting device optimization by synchronous electric charge extraction[J].Journal of Intelligent Material Systems and Structures,2005,16(10):865-875. doi: 10.1177/1045389X05056859
|
| [10] |
Hu Y T, Hu H P,Yang J S,et al.A low frequency piezoelectric power harvester using a spiral-shaped bimorph[J].Sciences in China, Ser G,2006,49(6):649-659. doi: 10.1007/s11433-006-2021-z
|
| [11] |
Yang J S, Zhou H G,Hu Y T,et al.Performance of a piezoelectric harvester in thickness-stretch mode of a plate[J].IEEE Trans on Ultrasonics, Ferroelectrics, and Frequency Control,2005,52(10):1872-1876. doi: 10.1109/TUFFC.2005.1561644
|
| [12] |
Hu Y T, Xue H,Yang J S,et al.Nonlinear behavior of a piezoelectric power harvester near resonance[J].IEEE Trans on Ultrasonics, Ferroelectrics, and Frequency Control,2006,53(7):1387-1391. doi: 10.1109/TUFFC.2006.1665088
|
| [13] |
Toikawa Y, Adachi K, Aoyagi M,et al.Some constructions and characteristics of rod-type piezoelectric ultrasonic motors using longitudinal and torsional vibrations[J].IEEE Trans on Ultrasonics, Ferroelectrics, and Frequency Control,1992,39(5): 600-608. doi: 10.1109/58.156178
|
| [14] |
Lin S Y. Sandwiched piezoelectric ultrasonic transducers of longitudinal-torsional compound vibration modes[J].IEEE Trans on Ultrasonics, Ferroelectrics, and Frequency Control,1997,44(6):1189-1197. doi: 10.1109/58.656619
|
| [15] |
Yang J S, Fang H Y, Jiang Q. A vibrating piezoelectric ceramic shell as a rotation sensor[J].Smart Materials and Structures,2000,9(4):445-451. doi: 10.1088/0964-1726/9/4/307
|
| [16] |
Tiersten H F.Linear Piezoelectric Plate Vibrations[M].New York: Plenum, 1969.
|
下载:
渝公网安备50010802005915号