Analytical Solution for Functionally Graded Anisotropic Cantilever Beam Subjected to Linearly Distributed Load
-
摘要: 对功能梯度各向异性弹性悬臂梁在线性分布载荷作用下的弯曲问题进行了研究.从平面应力问题的基本方程出发,假定应力函数为梁长度方向的多项式形式,由应力函数求导给出应力,利用协调方程和边界条件可完全确定应力函数.将解析解与有限元数值方法的结果进行了对比,两者吻合良好.Abstract: The bending problem of a functionally graded anisotropic cantilever beam subjected to a linearly distributed load is investigated. The analysis was based on the exact elasticity equations for the plane stress problem. The stress function was introduced and assumed in form of a polynomial of the longitudinal coordinate. The expressions for stress components were then educed from the stress function by simple differentiation. The stress function was determined from the compatibility equation as well as the boundary conditions by a skilful deduction. The analytical solution was compared with FEM calculation, indicating a good agreement.
-
[1] Sankar B V. An elasticity solution for functionally graded beams[J].Composites Science and Technology,2001,61(5):689-696. doi: 10.1016/S0266-3538(01)00007-0 [2] Sankar B V,Tzeng J T.Thermal stresses in functionally graded beams[J].AIAA J,2002,40(6):1228-1232. doi: 10.2514/2.1775 [3] Zhu H,Sankar B V. A combined Fourier-Galerkin method for the analysis of functionally graded beams[J].Journal of Applied Mechanics,2004,71(3):421-424. doi: 10.1115/1.1751184 [4] Lekhnitskii S G.Anisotropic Plate[M].New York: Gordon and Breach, 1968. [5] Ding H J, Huang D J,Chen W Q. Elasticity solutions for plane anisotropic functionally graded beams[J].International Journal of Solids and Structures,2007,44(1):176-196. doi: 10.1016/j.ijsolstr.2006.04.026
计量
- 文章访问数: 3186
- HTML全文浏览量: 209
- PDF下载量: 881
- 被引次数: 0