黏性不可压流体的自适应网格技术和基本特性方程分离算法的联合分析

S·图赖维瓦塔纳; P·布恩马勒特; P·瑟雷克; S·封查那帕尼; P·德乔姆凡

黏性不可压流体的自适应网格技术和基本特性方程分离算法的联合分析

1.
国立朱拉隆功大学工程学院机械工程系,曼谷 10330,泰国;2.北曼谷先皇科技大学工业技术学院机械工程系,曼谷 10800,泰国

基金项目: 泰国国家基金资助项目

计量
- 文章访问数: 2836
- HTML全文浏览量: 152
- PDF下载量: 618
- 被引次数: 0
出版历程
- 收稿日期: 2006-05-08
- 修回日期: 2007-05-08
- 刊出日期: 2007-09-15

Combined Adaptive Meshing Technique and Characteristic Based Split Algorithm for Viscous Incompressible Flow Analysis

1.
Department of Mechanical Engineering, Faculty of Engineering, Chulalongkorn University, Patumwan, Bangkok 10330, Thailand;

摘要

摘要: 组合基本特性方程分离算法和自适应网格技术，分析二维黏性不可压流体．该方法使用3节点三角单元，对速度分量和压力等变量分析，使用等阶次的插值函数．组合解法的主要优点在于，在自适应网格技术中，对解梯度变化大的区域，通过耦合误差估计生成小的单元,利于提高解的精度,在其它区域生成大单元，可以节省时间．最后，通过对一个黏性流体圆柱体绕流问题的瞬态和稳态特性分析,给出了组合解法性能的评价．
- 自适应网格 /
- 分离基本特性方程 /
- 有限元法 /
- 不可压流体
Abstract: A combined chara cteristic-based splitalgorithm and anada ptive meshing technique foranalyzing two-dimensional viscous incompressible flow is presented. The method uses the three-node triangular element with equal-order interpolation functions forall variables of the velocity components and pressure. The main a dvantage of the combined method is toimprove solution a ccuracy by coupling an error estimation procedure to anada ptivemeshing technique that generates small elements in regions with largechange in solution gradients, and at the same time, larger elements in other regions. The performance of the combined procedure is evaluated by analyzing the three testcases of the flow past a cylinder, for their transient and steady-state flow behaviors.
- adaptive mesh /
- caharcteristic-based split /
- finite element method /
- incompr essible flow

HTML全文

参考文献(16)

[1]	Yamada Y, Ito K, Yokouchi Y,et al.Finite element analysis of steady fluid and metal flow[J].Finite Elements in Fluids:Viscous Flow and Hydrodynamics,1974,1:73-94.
[2]	Kawahara M.Steady and unsteady finite element analysis of incompressible viscous fluid[J].Finite Elements in Fluids,1974,3:23-54.
[3]	Kawahara M, Yoshimura N, Nakagawa K,et al.Steady and unsteady finite element analysis of incompressible viscous fluid[J].International Journal for Numerical Methods in Engineering,1976,10:437-456. doi: 10.1002/nme.1620100213
[4]	Christie I, Griffiths D F, Mitchell A R, et al. Finite element methods for second order differential equations with significant first derivative[J].International Journal for Numerical Methods in Engineering,1976,10:1389-1396. doi: 10.1002/nme.1620100617
[5]	Heinrich J C, Huyakorn P S,Zienkiewicz O C,et al.An upwind finite element scheme for two-dimensional convective transport equation[J].International Journal for Numerical Methods in Engineering,1977,11:131-143. doi: 10.1002/nme.1620110113
[6]	Brooks A N, Heghes T J R. Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations[J].Computer Methods in Applied Mechanics and Engineering,1982,32:199-259. doi: 10.1016/0045-7825(82)90071-8
[7]	Wansophark N, Dechaumphai P. Enhancement of streamline upwinding finite element solutions by adaptive meshing technique[J].JSME International Journal Ser B, Fluids and Thermal Engineering,2002,45:770-779. doi: 10.1299/jsmeb.45.770
[8]	Zienkiewicz O C, Codina, R. A General algorithm for compressible and incompressible flow-part Ⅰ:The split, characteristic-based scheme[J].International Journal for Numerical Methods in Fluids,1995,20:869-885. doi: 10.1002/fld.1650200812
[9]	P·德乔姆凡，S·封查那帕尼.用于高速可压缩流体分析的带多维耗散格式的自适应Delaunay三角剖分[J].应用数学和力学，2005，26(10)，1216-1228.
[10]	Phongthanapanich S, Dechaumphai P. Evaluation of combined Delaunay triangulation and remeshing for finite element analysis of conductive heat transfer[J].Transactions of the Canadian Society for Mechanical Engineering,2004,27:319-340.
[11]	Frey W H. Mesh Relaxation: A new technique for improving triangulations[J].International Journal for Numerical Methods in Engineering,1991,31:1121-1133. doi: 10.1002/nme.1620310607
[12]	Borouchaki H, George P L, Mohammadi B. Delaunay mesh generation governed by metric specifications-part Ⅱ:Application[J].Finite Elements in Analysis and Design,1997,25:85-109. doi: 10.1016/S0168-874X(96)00065-0
[13]	White F M.Viscous Fluid Flow[M].Third edition.New York: McGraw-Hill, 2005.
[14]	Williamson C H K. Oblique and parallel modes of vortex shedding in the wake of a circular cylinder at low reynolds numbers[J].Journal of Fluid Mechanics,1989,206:579-627. doi: 10.1017/S0022112089002429
[15]	Braza M, Chassaing P, Ha Minh H. Numerical study and physical analysis of the pressure and velocity fields in the near wake of a circular cylinder[J].Journal of Fluid Mechanics,1986,165:79-130. doi: 10.1017/S0022112086003014
[16]	Karniadakis G E, Triantafyllou G S. A passive control of vortex shedding in the wake of a circular cylinder[J].Journal of Fluid Mechanics,1989,199:441-469. doi: 10.1017/S0022112089000431