剪切荷载作用下圆孔孔边裂纹的解

段士杰; 刘淑红

doi:10.21656/1000-0887.360352

剪切荷载作用下圆孔孔边裂纹的解

doi: 10.21656/1000-0887.360352

段士杰¹,
刘淑红^2,3

¹石家庄铁道大学继续教育学院, 石家庄 050043;²石家庄铁道大学工程力学系, 石家庄 050043;³河北省大型结构健康诊断与控制实验室, 石家庄 050043

基金项目: 河北省自然科学基金(A2015210089)；河北省高等学校科学技术研究重点项目(ZD2015101)

详细信息

作者简介:
段士杰（1968—），男，副教授(E-mail: dsj1968@sohu.com);刘淑红（1968—），女，教授，博士，硕士生导师(通讯作者. E-mail: liush@stdu.edu.cn).

中图分类号: O346.1
计量
- 文章访问数: 1247
- HTML全文浏览量: 167
- PDF下载量: 708
- 被引次数: 0
出版历程
- 收稿日期: 2015-12-24
- 修回日期: 2016-02-16
- 刊出日期: 2016-07-15

Solutions for a Circular Hole With Edge Cracks Under Shear Load

DUAN Shi-jie¹,
LIU Shu-hong^2,3

¹School of Adult Education, Shijiazhuang Tiedao University, Shijiazhuang 050043, P.R.China;²Department of Engineering Mechanics, Shijiazhuang Tiedao University, Shijiazhuang 050043, P.R.China;³Key Laboratory for Health Monitoring and Control of Large Structures of Hebei Province, Shijiazhuang 050043, P.R.China

摘要

摘要: 基于复变函数的方法，研究了在无限远处剪切荷载作用下，含两个径向不等边裂纹圆孔无限大板的平面问题，得到了应力函数和应力强度因子的解析解.通过算例，给出了通过应力函数得到的应力分量沿坐标轴方向和孔边的分布，同时给出了裂纹尖端的应力强度因子.可以看出，应力分量在裂纹尖端、孔附近变化剧烈，离缺陷稍远处趋于所加荷载，符合Saint Venant(圣维南)原理.另外，通过有限元计算了以上数值结果，与解析解的结果进行对比，吻合较好，说明了理论公式推导的正确性.
- 裂纹 /
- 应力函数 /
- 应力强度因子 /
- 复变函数 /
- 有限元
Abstract: A 2D mechanical analysis was performed on an infinite plate containing a circular hole with two collinear edge cracks of unequal lengths, under uniformly distributed shear load at infinity. Based on the complex variable function method, the analytic solutions of stress functions and stress intensity factors were obtained. Through an numerical example, the stress distributions along the coordinate axes and the hole edge were given in the graphical form, and the stress intensity factors were also calculated. The results show that, there is obvious stress concentration near the hole and the cracks, and the stress values far from the defects tend towards the applied load, which conforms to the Saint-Venant’s principle. In addition, the results from the finite element simulation agree well with the analytic solutions, to prove the correctness of the theoretical derivation.
- crack /
- stress function /
- stress intensity factor /
- complex function /
- finite element method

HTML全文

参考文献(15)

[1]	Bowie O L. Analysis of an infinite plate containing radial cracks originating at the boundary of an internal circular hole[J].Journal of Mathematical Physics,1956,35(1/4): 60-71.
[2]	YAN Xiang-qiao. A numerical analysis of cracks emanating from an elliptical hole in a 2-D elasticity plate[J].European Journal of Mechanics—A/Solids,2006,25(1): 142-153.
[3]	郭怀民, 刘官厅, 皮建东. 带裂纹的椭圆孔口问题的应力分析[J]. 固体力学学报, 2007,28(3): 308-312.(GUO Huai-min, LIU Guan-ting, PI Jian-dong. Stress analysis of an ellipse hole with a straight edge-crack by complex variable method[J].Acta Mechanica Solida Sinica,2007,28(3): 308-312.(in Chinese))
[4]	郭俊宏, 刘官厅. 带双裂纹的椭圆孔口问题的应力分析[J]. 力学学报, 2007,39(5): 699-703.(GUO Jun-hong, LIU Guan-ting. Stress analysis for an elliptical hole with two straight cracks[J].Chinese Journal of Theoretical and Applied Mechanics,2007,39(5): 699-703.(in Chinese))
[5]	郭怀民, 乔文华. 椭圆孔边两不对称裂纹问题的复变函数解[J]. 力学季刊, 2011,32(3): 444-451.(GUO Huai-min, QIAO Wen-hua. Complex variable function analysis of an elliptic hole with asymmetry edge cracks[J].Chinese Quarterly Mechanics,2011,32(3): 444-451.(in Chinese))
[6]	郭俊宏, 袁泽帅, 卢子兴. 幂函数型曲线裂纹平面问题的一般解[J]. 应用数学和力学, 2011,32(5): 533-540.(GUO Jun-hong, YUAN Ze-shuai, LU Zi-xing. General solutions of plane problem for power function curved cracks[J].Applied Mathematics and Mechanics,2011,32(5): 533-540.(in Chinese))
[7]	ZHAO Jin-fang, XIE Li-yang, LIU Jian-zhong, ZHAO Qun. A method for stress intensity factor calculation of infinite plate containing multiple hole-edge cracks[J].International Journal Fatigue,2012,35(1): 2-9.
[8]	刘淑红, 齐月芹, 冯得得, 史晓佳, 万涛平. 含椭圆孔单边裂纹板的数值分析[J]. 机械工程学报, 2012,48(20): 83-87.(LIU Shu-hong, QI Yue-qin, FENG De-de, SHI Xiao-jia, WAN Tao-ping. Numerical analysis of crack emanating from elliptical hole[J].Journal of Mechanical Engineering,2012,48(20): 83-87.(in Chinese))
[9]	刘淑红, 李延强, 沈英明. 含椭圆孔压电材料的电弹场[J]. 工程力学, 2012,29(12): 45-50.(LIU Shu-hong, LI Yan-qiang, SHEN Ying-ming. The electro-elastic fields of piezoelectric materials with an elliptic hole[J].Engineering Mechanics,2012,29(12): 45-50.(in Chinese))
[10]	LIU Shu-hong, SHEN Ying-ming, LIU Jin-xi. Exact solutions for piezoelectric materials with an elliptic hole or a crack under uniform internal pressure[J].Chinese Journal of Mechanical Engineering,2012,25(4): 845-852.
[11]	DU Yan-liang, LIU Shu-hong, DUAN Shi-jie, LI Yan-qiang. Electro-elastic fields of piezoelectric materials with an elliptic hole under uniform internal shearing forces[J].Chinese Journal of Mechanical Engineering,2013,26(3): 454-461.
[12]	LIU Shu-hong, DUAN Shi-jie. Analytical solutions of cracks emanating from an elliptical hole under shear[J].Chinese Journal of Aeronautics,2014,27(4): 829-834.
[13]	LIU Shu-hong, DUAN Shi-jie. Analytical solutions of cracks emanating from an elliptic hole in an infinite plate under tension[J].Chinese Journal of Mechanical Engineering,2014,27(5): 1057-1063.
[14]	周妍, 张财贵, 杨井瑞, 王启智. 圆孔内单边(或双边)裂纹平台巴西圆盘应力强度因子的全面标定[J]. 应用数学和力学, 2015,36(1): 16-30.(ZHOU Yan, ZHANG Cai-gui, YANG Jing-rui, WANG Qi-zhi. Comprehensive calibration of the stress intensity factor for the holed flattened Brazilian disc with an inner single crack or double cracks[J].Applied Mathematics and Mechanics,2015,36(1): 16-30.(in Chinese))
[15]	高健, 刘官厅. 一维正方准晶中半无限裂纹问题的解析解[J]. 应用数学和力学, 2015,36(9): 945-955.(GAO Jian, LIU Guan-ting. Analytical solutions for problems of 1D orthorhombic quasicrystal with semi-infinite crack[J].Applied Mathematics and Mechanics,2015,36(9): 945-955.(in Chinese))