层状陶瓷的材料力和裂纹力评估方法

陈昌荣

doi:10.21656/1000-0887.370088

层状陶瓷的材料力和裂纹力评估方法

doi: 10.21656/1000-0887.370088

陈昌荣

上海工程技术大学飞行学院, 上海 201620

基金项目: 国家自然科学基金（51175321）

详细信息

作者简介:
陈昌荣（1964—），男，教授, 博士（E-mail: 13761742152@163.com）.

中图分类号: O343
计量
- 文章访问数: 1189
- HTML全文浏览量: 114
- PDF下载量: 989
- 被引次数: 0
出版历程
- 收稿日期: 2016-03-28
- 修回日期: 2016-04-21
- 刊出日期: 2016-07-15

A Method for Evaluating Material Forces and Crack Forces in Ceramic Laminates

CHEN Chang-rong

School of Flight Technology, Shanghai University of Engineering Science, Shanghai 201620, P.R.China

Funds: The National Natural Science Foundation of China（51175321）

摘要

摘要: 用J积分理论分析了层状陶瓷受弯曲载荷作用时J_far(0)，J_far(a)，J_far(a)-J_far(0)和J_tip的特点，这里J_far(0)，J_far(a)分别表示无裂纹时和裂纹长度为a时的远场J积分，J_t_ip表示裂尖J积分.裂纹是垂直于界面的表面裂纹，基本假设是裂纹只影响局部应力应变场.由于积分路径所包围的材料界面长度随积分路径变化，导致J_far(0)和J_far(a)都随积分路径变化，但当积分路径远离裂纹影响区域时J_far(a)-J_far(0)不再随路径变化.J_far(a)-J_far(0)可作为非均匀材料断裂的远场驱动力参量，J_tip-(J_far(a)-J_far(0))可用来评价材料非均匀性对裂纹扩展驱动力的促进或抑制作用.
- J积分 /
- 材料非均匀性 /
- 层状陶瓷 /
- 内应力 /
- 界面
Abstract: Characteristics of J_far(0), J_far(a), J_far(a)-J_far(0)and J_tip were analyzed for ceramic laminates under bending loads based on the J-integral theory. Here J_far(0) and J_far(a) were the far-field J-integrals corresponding to crack lengths 0 and a respectively. The crack was perpendicular to the interfaces. A basic assumption was that the crack length was small compared with the laminate thickness, and the stress and strain fields in the region far from the crack were little influenced by the crack. Both J_far(0) and J_far(a) were path-dependent, because the lengths of the interfaces enclosed by the path of integration varied with the path. However, J_far(a)-J_far(0) became path-independent when the path was far from the crack. J_far(a)-J_far(0) was seen as a parameter to represent the global driving force for fracture. The purpose is to make the present method available to evaluate the inhibiting or boosting effects of material inhomogeneities on the crack tip driving force by J_tip-(J_far(a)-J_far(0)).
- J-integral /
- material inhomogeneity /
- ceramic laminate /
- internal stress /
- interface

HTML全文

参考文献(20)

[1]	Kolednik O, Predan J, Gubeljak N, Fischer D F. Modeling fatigue crack growth in biomaterial specimen with the configurational force concept[J].Materials Science and Engineering: A,2009,519(1/2): 172-183.
[2]	Fischer F D, Predan J, Müller R, Kolednik O. On problems with the determination of the fracture resistance for materials with spatial variations of the Young’s modulus[J].International Journal of Fracture,2014,190(1): 23-38.
[3]	Eshelby J D. The elastic energy-momentum tensor[J].Journal of Elasticity,1975,5(3): 321-335.
[4]	CHEN Wen-hua, WU Chei-wei. On theJ -integral for a pressurized crack in bonded materials[J].International Journal of Fracture,1980,16(2): R47-R51.
[5]	Riemelmoser O, Pippan R. TheJ -integral at Dugdale cracks perpendicular to interfaces of materials with dissimilar yield stresses[J].International Journal of Fracture,2000,103(4): 397-418.
[6]	Chen C R, Pascual J, Fischer F D, Kolednik O, Danzer R. Prediction of the fracture toughness of a ceramic multilayer composite: modeling and experiments[J].Acta Materialia,2007,55(2): 409-421.
[7]	Chen C R, Bermejo R, Kolednik O. Numerical analysis on special cracking phenomena of residual compressive inter-layer in ceramic laminates[J].Engineering Fracture Mechanics,2010,77(13): 2567-2576.
[8]	Bermejo R, Torres Y, Sánchez-Herencia A J, Baudín C, Anglada M, Llanes L. Residual stresses, strength and toughness of laminates with different layer thickness ratios[J].Acta Materialia,2006,54(18): 4745-4757.
[9]	Sun C T, Wu X X. On the J-integral in periodically layered composites[J].International Journal of Fracture,1996,78(1): 89-100.
[10]	Rask M, Sorensen B F. Determination of theJintegral for laminated double cantilever beam specimens: the curvature approach[J].Engineering Fracture Mechanics,2012,96: 37-48.
[11]	Eshelby J D. The force on an elastic singularity[J].Phil Trans R So Lond A,1951,244(871): 87-112.
[12]	Rice J R. A path independent integral and the approximate analysis of strain concentration by notches and cracks[J].Journal of Applied Mechanics,1968,35(2): 379-386.
[13]	Nguyen T D, Govindjee S, Klein P A, Gao H. A material force method for inelastic fracture mechanics[J].Journal of Mechanics and Physics of Solids,2005,53(1): 91-121.
[14]	Markenscoff X. Driving forces on phase boundaries: the Eshelby principle for an interface[J].International Journal of Fracture,2010,165(2): 223-227.
[15]	Simha N K, Fischer F D, Shan G X, Chen C R, Kolednik O.J -integral and crack driving force in elastic-plastic materials[J].Journal of the Mechanics and Physics of Solids,2008,56(9): 2876-2895.
[16]	Simha N K, Fischer F D, Kolednik O, Chen C R. Inhomogeneity effects on the crack driving force in elastic and elastic-plastic materials[J].Journal of the Mechanics and Physics of Solids,2003,51(1): 219-240.
[17]	Fischer F D, Predan J, Kolednik O, Simha N K. Application of material forces to fracture of inhomogeneous materials: illustrative examples[J].Archive of Applied Mechanics,2007,77(2): 95-112.
[18]	钟万勰. 力学与对称-离散：祖冲之方法论[J]. 应用数学和力学, 2016,37(1): i-ii. (ZHONG Wan-xie. Mechanics and symmetry-discretization: Zu-type methodology[J].Applied Mathematics and Mechanics,2016,37(1): i-ii. (in Chinese))
[19]	Tang S, Guo T F, Cheng L. Mode mixity and nonlinear viscous effects on toughness of interfaces[J].International Journal of Solids and Structures,2008,45(9): 2493-2511.
[20]	陈昌荣. 适合裂尖穿越界面行为分析的断裂模拟方法研究[J]. 应用数学和力学, 2014,35(9): 979-985.(CHEN Chang-rong. On the fracture modeling method for crack tips penetrating elastic interfaces[J].Applied Mathematics and Mechanics,2014,35(9): 979-985.(in Chinese))