三维变弯度机翼前缘柔性蒙皮优化设计

吕帅帅; 王彬文; 杨宇

doi:10.21656/1000-0887.400384

三维变弯度机翼前缘柔性蒙皮优化设计

doi: 10.21656/1000-0887.400384

中国飞机强度研究所智能结构与结构健康监测研究室, 西安 710065

详细信息

作者简介:
吕帅帅(1987—)，女，工程师，硕士生(通讯作者. E-mail: 647817545@qq.com)；王彬文(1974—)，男，研究员，博士(E-mail: asriwbw@sina.com)；杨宇(1980—)，男，高级工程师，博士(E-mail: yu.yang.asri@qq.com).

中图分类号: O39
计量
- 文章访问数: 918
- HTML全文浏览量: 129
- PDF下载量: 231
- 被引次数: 0
出版历程
- 收稿日期: 2019-12-27
- 修回日期: 2020-02-18
- 刊出日期: 2020-06-01

Optimal Design of Flexible Skin on the Leading Edge of a 3D Variable-Camber Wing

Intelligent Structure and Structural Health Monitoring Laboratory, Aircraft Strength Research Institute, Xi’an 710065, P.R.China

摘要

摘要: 光滑连续变弯度机翼前缘具有降低噪声和提升气动效率的优势.该文在二维翼型柔性蒙皮设计方法的基础上，提出了一种面向后掠机翼变弯度前缘柔性蒙皮的设计方法，其主要改进在于沿翼展方向对多个翼型进行同步优化、对目标函数进行修正从而解决了畸形变形问题，对现有带精英策略非支配排序遗传算法(NSGA-Ⅱ)进行修改以适应三维蒙皮的多目标优化求解.研究表明，与现有设计方法相比，该方法可使柔性蒙皮的变形精度提高27%，实现其在下垂状态下的高精度外形.
- 变弯度机翼 /
- 柔性蒙皮 /
- 后掠角 /
- NSGA-Ⅱ /
- 多目标优化
Abstract: The smooth continuous wing leading edge with variable cambers has the advantages of reduced noise and improved aerodynamic efficiency. Based on the 2D airfoil flexible skin design method, a design method for flexible skin on the variable-curvature leading edge of a swept-back airfoil was proposed. The main improvement lies in the synchronous optimization of multiple airfoil profiles along the wingspan direction, the modification of the objective function to solve the deformation problem, and the modification of NSGA-II with the elite strategy to adapt to the multi-objective optimization of 3D skin. The research shows that, compared with the existing design method, this method can improve the deformation accuracy of the flexible skin by 27% and realize the accurate shape of the flexible skin in the drooping state.
- variable-camber wing /
- flexible skin /
- sweep angle /
- NSGA-Ⅱ /
- multi-objective optimization

HTML全文

参考文献(16)

[1]	KRETH S, KNIG R, WILD J. Aircraft noise determination of novel wing configurations[C]// Inter-Noise.Istanbul, Türkei, 2007.
[2]	黄杰, 葛文杰, 杨方. 实现机翼前缘形状连续变化柔性机构的拓扑优化[J]. 航空学报, 2007,29(7): 988-992.(HUANG Jie, GE Wenjie, YANG Fang. Topology optimization of the compliant mechanism for shape change of airfoil leading edge[J]. Acta Aeronautica et Astronautica Sinica,2007,29(7): 988-992.(in Chinese))
[3]	杨智春, 党会学, 解江. 基于动网格技术的柔性后缘自适应机翼气动特性分析[J]. 应用力学学报, 2009,26(3): 548-553.(YANG Zhichun, DANG Huixue, XIE Jiang. Aerodynamic characteristics of flexible trailing edge adaptive wing by unstructured dynamic meshes[J]. Chinese Journal of Applied Mechanics,2009,26(3): 548-553.(in Chinese))
[4]	邹森, 刘勇, 王琦. 翼涡干扰前缘开孔被动控制数值研究[J]. 应用数学和力学, 2019,40(10): 1159-1168.(ZOU Sen, LIU Yong, WANG Qi. Numerical study on passive control of wing vortex interference front opening[J]. Applied Mathematics and Mechanics,2019,40(10): 1159-1168.(in Chinese))
[5]	SATTI R, LI Y, SHOCK R, et al. Computational aeroacoustic analysis of a high-lift configuration[C]// 〖STBX〗46th AIAA Aerospace Sciences Meeting and Exhibit.Reno Nevada, USA, 2008: 654-681.
[6]	PECORA R, MAGNIFICO M, AMOROSO F, et al. Structural design of an adaptive wing trailing edge for large aeroplanes[C]//WLCKEN P C， PAPADOPOULOS M, eds. Smart Intelligent Aircraft Structures. Switzerland: Springer, 2016: 159-170.
[7]	KINTSCHER M, WIEDEMANN M, MONNER H P, et al. Design of a smart leading edge device for low speed wind tunnel tests in the European project SADE[J].International Journal of Structural Integrity,2011,2(4): 383-405.
[8]	RUDENKO A, RADESTOCK M, MONNER H P. Optimization, design and structural testing of a high deformable morphing leading edge of an active blown high lift system[C]//24th AIAA/AHS Adaptive Structures Conference.San Diego, California, USA, 2016.
[9]	VASISTA S, GASPARI A D, RICCI S, et al. Compliant structures-based wing and wingtip morphing devices[J]. Aircraft Engineering and Aerospace Technology,2016,88(5): 210-228.
[10]	KINTSCHER M, GEIER S, MONNER H P, et al. Investigation of multi-material laminates for smart droop nose devices[C]//29th Congress of the International Council of the Aeronautical Sciences.St Petersburg, Russia, 2014.
[11]	WANG Z G, YANG Y, SUN X S. Structural optimization of a variable camber leading edge[C]// 1st EU-China Aeronautical Cooperation Workshop: INNOVATE.Glasgow, UK, 2018: 20-31.
[12]	王珑，王同光，罗源. 改进的NSGA-Ⅱ算法研究风力机叶片多目标优化[J]. 应用数学和力学, 2011,32(6): 693-701.(WANG Long, WANG Tongguang, LUO Yuan. Improved non-dominated sorting genetic algorithm (NSGA)-Ⅱ in multi-objective optimization studies of wind turbine blades[J]. Applied Mathematics and Mechanics,2011,32(6): 693-701.(in Chinese))
[13]	DEB K, AGRAWAL S, PRATAP A, et al. A fast elitist non-dominated sorting genetic algorithm for multi-objective optimization: NSGA-Ⅱ[M]// Parallel Problem Solving From Nature PPSN VI.Springer, 2000: 849-858.
[14]	LI Shuguang. Rigidities of one-dimensional laminates of composite materials[J]. Journal of Engineering Mechanics,1996,122(4): 371.
[15]	CARRERA E, PAGANI A. Multi-line enhanced beam model for the analysis of laminated composite structures[J]. Composites Part B,2014,57(3): 112-119.
[16]	VINSON J R, SIERAKOWSKI R L. The behavior of structures composed of composite materials[J]. Journal of Applied Mechanics,2002,105: 215-258.

施引文献

资源附件(0)

访问统计

点击查看大图

计量

文章访问数: 918
HTML全文浏览量: 129
PDF下载量: 231
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

三维变弯度机翼前缘柔性蒙皮优化设计

doi: 10.21656/1000-0887.400384

作者简介:
吕帅帅(1987—)，女，工程师，硕士生(通讯作者. E-mail: 647817545@qq.com)；王彬文(1974—)，男，研究员，博士(E-mail: asriwbw@sina.com)；杨宇(1980—)，男，高级工程师，博士(E-mail: yu.yang.asri@qq.com).

计量

Optimal Design of Flexible Skin on the Leading Edge of a 3D Variable-Camber Wing

计量

目录

留言板

三维变弯度机翼前缘柔性蒙皮优化设计

doi: 10.21656/1000-0887.400384

作者简介: 吕帅帅(1987—)，女，工程师，硕士生(通讯作者. E-mail: 647817545@qq.com)；王彬文(1974—)，男，研究员，博士(E-mail: asriwbw@sina.com)；杨宇(1980—)，男，高级工程师，博士(E-mail: yu.yang.asri@qq.com).

计量

出版历程

Optimal Design of Flexible Skin on the Leading Edge of a 3D Variable-Camber Wing

计量

出版历程

目录

作者简介:
吕帅帅(1987—)，女，工程师，硕士生(通讯作者. E-mail: 647817545@qq.com)；王彬文(1974—)，男，研究员，博士(E-mail: asriwbw@sina.com)；杨宇(1980—)，男，高级工程师，博士(E-mail: yu.yang.asri@qq.com).