基于L-S广义热弹性理论YSZ在超短脉冲下的热力响应

赵颐; 田晓耕

doi:10.21656/1000-0887.430134

基于L-S广义热弹性理论YSZ在超短脉冲下的热力响应

doi: 10.21656/1000-0887.430134

赵颐,
田晓耕^,

西安交通大学机械结构强度与振动国家重点实验室，西安 710000

基金项目:

国家自然科学基金项目 11732007

详细信息

作者简介:
赵颐(1999—)，男，硕士生(E-mail: gssdzhaoyi@foxmail.com)

通讯作者:
田晓耕(1967—)，男，教授，博士，博士生导师(通讯作者. E-mail: tiansu@mail.xjtu.edu.cn)

中图分类号: O34
计量
- 文章访问数: 312
- HTML全文浏览量: 96
- PDF下载量: 68
- 被引次数: 0
出版历程
- 收稿日期: 2022-04-14
- 修回日期: 2022-07-06
- 刊出日期: 2023-07-01

Thermomechanical Responses of YSZ Under Ultrashort Thermal Shock Based on the L-S Generalized Thermoelastic Theory

ZHAO Yi,
TIAN Xiaogeng^,

State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi'an Jiaotong University, Xi'an 710000, P.R.China

摘要

摘要: 基于L-S广义热弹性理论，考虑材料比热容随温度变化，建立了含有内热源的热弹耦合系统控制方程. 利用有限元方法研究了氧化钇四方氧化锆(YSZ)在超短脉冲激光作用下的热力响应，获得了材料比热容随温度变化、激光的脉冲宽度等对热力响应的影响，以及机械波在材料中的反射. 研究发现，多次脉冲作用下，材料的应力、位移曲线均出现波动，力学响应对加热更加敏感，比热容随温度变化会导致热力响应降低，该研究对提高超短脉冲激光加工质量具有重要的指导作用.
- 超短脉冲激光 /
- 广义热弹性 /
- 有限元 /
- 热力耦合
Abstract: Based on the L-S generalized thermoelastic theory and in view of the specific heat capacity change of material with temperature, the control equations for the thermoelastic coupling system with internal heating source were established. The thermomechanical responses of yttrium tetragonal zirconia (YSZ) under the action of ultrashort pulse laser were studied by means of the finite element method. The effects of the specific heat capacity change with temperature, and the pulse width of the laser on the thermomechanical responses and the mechanical wave reflections in material were obtained. The results show that, under repeated pulse laser actions, the stress and displacement of the material will undergo fluctuations, and the mechanical response will be more sensitive to heating than the thermal response. The specific heat capacity change with temperature will result in the decrease of the thermal response. The study provides an important guidance for improving the ultrashort pulse laser machining quality.
- ultrashort pulse laser /
- generalized thermoelasticity /
- finite element /
- thermomechanical coupling

HTML全文

图 1 轮廓迂回法打孔示意图

Figure 1. Schematic diagram of contour roundabout punching

下载: 全尺寸图片幻灯片

图 2 杆的温度分布

Figure 2. Temperature distributions of the rod

下载: 全尺寸图片幻灯片

图 3 t=1时杆的应力σ_xx分布

Figure 3. Stress σ_xx distributions of the bar at t=1

下载: 全尺寸图片幻灯片

图 4 激光脉冲随时间的变化

Figure 4. The variations of laser pulses with time

下载: 全尺寸图片幻灯片

图 5 脉宽为2时的热力响应

Figure 5. Thermal-mechanical responses with a pulse width of 2

下载: 全尺寸图片幻灯片

图 6 脉宽为4时的热力响应

Figure 6. Thermal-mechanical responses with a pulse width of 4

下载: 全尺寸图片幻灯片

图 7 不同参数下的热力响应

Figure 7. Thermal-mechanical responses under different parameters

下载: 全尺寸图片幻灯片

图 8 比热容是否变化对热力响应的影响

Figure 8. Effects of the specific heat capacity change on the thermal-mechanical response

下载: 全尺寸图片幻灯片

图 9 应力σ_rr随时间的变化

Figure 9. Variations of stress σ_rr with time

下载: 全尺寸图片幻灯片

图 10 应力σ_θθ随时间的变化

Figure 10. Variations of stress σ_θθ with time

下载: 全尺寸图片幻灯片

图 11 z=10处的应力分布

Figure 11. Stress distributions at z=10

下载: 全尺寸图片幻灯片

参考文献(34)

[1]	杜洋, 赵凯, 朱忠良, 等. 超快激光精密制造技术的研究与应用[J]. 激光与红外, 2020, 50(12): 1419-1425. https://www.cnki.com.cn/Article/CJFDTOTAL-JGHW202012002.htm DU Yang, ZHAO Kai, ZHU Zhongliang, et al. Research and application of ultrafast laser precision manufacturing technology[J]. Laser & Infrared, 2020, 50(12): 1419-1425. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JGHW202012002.htm
[2]	温嵘, 王琦, 李璇, 等. 超快激光加工技术在航空发动机制造中的应用[J]. 电加工与模具, 2020, 55(6): 56-59. https://www.cnki.com.cn/Article/CJFDTOTAL-DJGU202006011.htm WEN Rong, WANG Qi, LI Xuan, et al. Application of ultrafast laser machining technology in aero-engine manufacturing[J]. Electric Machining and Touch Tools, 2020, 55(6): 56-59. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-DJGU202006011.htm
[3]	PHILLIPS K C, GANDHI H H, MAZUR E, et al. Ultrafast laser processing of materials: a review[J]. Advances in Optics and Photonics, 2015, 7(4): 684-712. doi: 10.1364/AOP.7.000684
[4]	周可平, 何林美, 赵晓梅, 等. 飞秒激光新技术的应用研究[J]. 航空精密制造技术, 2020, 56(6): 34-37. https://www.cnki.com.cn/Article/CJFDTOTAL-HJZJ202006009.htm ZHOU Keping, HE Linmei, ZHAO Xiaomei, et al. Application of femtosecond laser technology[J]. Aviation Precision Manufacturing Technology, 2020, 56(6): 34-37. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-HJZJ202006009.htm
[5]	SHEN H, FENG D. Thermal and mechanical behavior in laser trepan drilling of yttria-stabilized zirconia[J]. Journal of Heat Transfer, 2019, 141(4): 042101. doi: 10.1115/1.4042778
[6]	秦渊, 毕娟, 倪晓武, 等. 毫秒激光金属打孔的解析和实验[J]. 光学精密工程, 2011, 19(2): 340-347. https://www.cnki.com.cn/Article/CJFDTOTAL-GXJM201102018.htm QIN Yuan, BI Juan, NI Xiaowu, et al. Analysis and experiment of metal drilling by millisecond laser[J]. Optics and Precision Engineering, 2011, 19(2): 340-347. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GXJM201102018.htm
[7]	赵万芹, 梅雪松, 王文君. 超短脉冲激光微孔加工(上): 理论研究[J]. 红外与激光工程, 2019, 48(1): 140-148. https://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201902019.htm ZHAO Wanqin, MEI Xuesong, WANG Wenjun. Ultra-short pulse laser microhole machining (part Ⅰ): theoretical study[J]. Infrared and Laser Engineering, 2019, 48(1): 140-148. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201902019.htm
[8]	CHENG J, LIU C S, SHANG S, et al. A review of ultrafast laser materials micromachining[J]. Optics and Laser Technology, 2013, 46(1): 88-102.
[9]	RAHAMAN A, DU X, ZHOU B, et al. Absorption and temperature distribution during ultrafast laser microcutting of polymeric materials[J]. Journal of Laser Applications, 2020, 32(2): 022044. doi: 10.2351/7.0000080
[10]	RAHAMAN A, KAR A, YU X. Thermal effects of ultrafast laser interaction with polypropylene[J]. Opt Express, 2019, 27(4): 5764-5783. doi: 10.1364/OE.27.005764
[11]	田晓耕, 沈亚鹏. 广义热弹性问题研究进展[J]. 力学进展, 2012, 42(1): 18-28. https://www.cnki.com.cn/Article/CJFDTOTAL-LXJZ201201004.htm TIAN Xiaogeng, SHEN Yapeng. Advances in generalized thermoelastic problems[J]. Advances in Mechanics, 2012, 42(1): 18-28. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-LXJZ201201004.htm
[12]	包立平, 胡玉博, 吴立群. 具有初值间断的Burgers方程奇摄动解[J]. 应用数学和力学, 2020, 41(7): 807-816. doi: 10.21656/1000-0887.400270 BAO Liping, HU Yubo, WU Liqun. Singularly perturbed solutions of burgers equations with initial value discontinuities[J]. Applied Mathematics and Mechanics, 2020, 41(7): 807-816. (in Chinese) doi: 10.21656/1000-0887.400270
[13]	谭胜, 吴建军, 黄强, 等. 基于双相延迟模型的飞秒激光烧蚀金属模型[J]. 物理学报, 2019, 68(5): 233-244. https://www.cnki.com.cn/Article/CJFDTOTAL-WLXB201905027.htm TAN Sheng, WU Jianjun, HUANG Qiang, et al. A femtosecond laser ablation model based on two-phase delay model[J]. Acta Physica Sinica, 2019, 68(5): 233-244. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-WLXB201905027.htm
[14]	TZOU D Y. A unified field approach for heat conduction from macro-to micro-scales[J]. Journal of Heat Transfer, 1995, 117(1): 8-16.
[15]	XIONG Q L, LI Z H, TIAN X G. Ultrafast thermomechanical responses of a copper film under femtosecond laser trains: a molecular dynamics study[J]. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2015, 471(2184). DOI: 10.1098/rspa.2015.0614.
[16]	LI Y, LI C, YAO W, et al. Solid-to-super-critical phase change and resulting stress wave during internal laser ablation[J]. Journal of Thermal Stresses, 2018, 41(10/12): 1364-1379.
[17]	CATTANEO C. Sulla conduzione del calore[C]//Attidel Seminario Matematico e Fisicodella Università di Modena. Vol 3. 1948: 83-101.
[18]	VERNOTTE P. Les paradoxes de la theorie continue de l'equation de la chaleur[J]. Comptes Rendus, 1958, 246: 3154-3155.
[19]	LORD H W, SHULMAN Y. A generalized dynamical theory of thermoelasticity[J]. Journal of the Mechanics and Physics of Solids, 1967, 15(5): 299-309.
[20]	何天虎, 曹丽, 周又和. 受移动热源作用的两端固定杆的广义热-弹耦合问题[J]. 工程力学, 2008, 25(5): 22-26. https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX200805008.htm HE Tianhu, CAO Li, ZHOU Youhe. Generalized thermal-elastic coupling problem of fixed rod with two ends subjected to moving heat source[J]. Engineering Mechanics, 2008, 25(5): 22-26. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX200805008.htm
[21]	WANG X, XU X. Thermoelastic wave induced by pulsed laser heating[J]. Applied Physics A: Materials Science & Processing, 2001, 73(1): 107-114.
[22]	黄飞, 马永斌. 移动热源作用下基于分数阶应变的三维弹性体热-机响应[J]. 应用数学和力学, 2021, 42(4): 373-384. doi: 10.21656/1000-0887.400346 HUANG Fei, MA Yongbin. Thermomechanical responses of 3D media under moving heat sources based on fractional-order strains[J]. Applied Mathematics and Mechanics, 2021, 42(4): 373-384. (in Chinese) doi: 10.21656/1000-0887.400346
[23]	马永斌, 李东升. 考虑记忆效应及尺寸效应窄长薄板的磁-热弹性耦合动态响应[J]. 应用数学和力学, 2022, 43(8): 888-900. doi: 10.21656/1000-0887.420200 MA Yongbin, LI Dongsheng. Magneto-thermoelastic coupling dynamic responses of narrow long thin plates under memory effects and size effects[J]. Applied Mathematics and Mechanics, 2022, 43(8): 888-900. (in Chinese) doi: 10.21656/1000-0887.420200
[24]	EL-KARAMANY A S, EZZAT M A. Thermal shock problem in generalized thermo-viscoelasticty under four theories[J]. International Journal of Engineering Science, 2004, 42(7): 649-671.
[25]	熊春宝, 郭颖, 刁钰, 等. 荷载作用下多孔饱和地基的热-水-力耦合动力响应分析[J]. 计算力学学报, 2018, 35(6): 795-801. https://www.cnki.com.cn/Article/CJFDTOTAL-JSJG201806021.htm XIONG Chunbao, GUO Ying, DIAO Yu, et al. Analysis of thermal-hydro-mechanical coupling dynamic response of porous saturated foundation under load[J]. Chinese Journal of Computational Mechanics, 2018, 35(6): 795-801. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JSJG201806021.htm
[26]	ABO-DAHAB S, ABD-ALLA A, ALQARNI A J. A two-dimensional problem with rotation and magnetic field in the context of four thermoelastic theories[J]. Results in Physics, 2017, 7: 2742-2751.
[27]	ALOTAIBI H, ABO-DAHAB S, KHALIL E, et al. Mathematical modeling on rotational magneto-thermoelastic phenomenon under gravity and laser pulse considering four theories[J]. Complexity, 2021, 2021: 5521684.
[28]	DESWAL S, KALKAL K. A two-dimensional generalized electro-magneto-thermoviscoelastic problem for a half-space with diffusion[J]. International Journal of Thermal Sciences, 2011, 50(5): 749-759.
[29]	CHASE JR M W. NIST-JANAF thermochemical tables[C]//Journal of Physical and Chemical Reference Data. Monograph 9, 1998.
[30]	VEDAVARZ A, KUMAR S, MOALLEMI M K. Significance of non-fourier heat waves in conduction[J]. Journal of Heat Transfer, 1994, 116(1): 221-224.
[31]	ZHENG C, ZHAO K, SHEN H, et al. Crack behavior in ultrafast laser drilling of thermal barrier coated nickel superalloy[J]. Journal of Materials Processing Technology, 2020, 282: 116678.
[32]	关振铎, 张中太, 焦金牛. 无机材料物理性能[M]. 北京: 清华大学出版社, 2011: 87-117. GUAN Zhenduo, ZHANG Zhongtai, JIAO Jinniu. Physical Properties of Inorganic Materials[M]. Beijing: Tsinghua University Press, 2011: 87-117. (in Chinese)
[33]	徐辉, 邓建兵, 沈江立. 固体材料比热容随温度变化规律的研究[J]. 宇航材料工艺, 2011, 41(5): 74-77. https://www.cnki.com.cn/Article/CJFDTOTAL-YHCG201105020.htm XU Hui, DENG Jianbing, SHEN Jiangli. Study on specific heat capacity of solid materials with temperature variation[J]. Aerospace Materials & Technology, 2011, 41(5): 74-77. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-YHCG201105020.htm
[34]	单水维. Y₂O₃稳定ZrO₂陶瓷材料导热性能的研究[D]. 硕士学位论文. 包头: 内蒙古科技大学, 2007. SHAN Shuiwei. Study on thermal conduction properties of yttria-stabilized zirconia ceramic material[D]. Master Thesis. Baotou: Inner Mongolia University of Science & Technology, 2007. (in Chinese)