指数型体积分数功能梯度材料的薄壁圆柱壳振动

A·G·沙哈; T·曼穆德; M·N·那姆

doi:10.3879/j.issn.1000-0887.2009.05.007

指数型体积分数功能梯度材料的薄壁圆柱壳振动

doi: 10.3879/j.issn.1000-0887.2009.05.007

1.
巴哈瓦浦耳伊斯兰大学数学系,巴基斯坦;
统治学院大学数学系,费萨拉巴德,巴基斯坦

详细信息

中图分类号: O327
计量
- 文章访问数: 1854
- HTML全文浏览量: 178
- PDF下载量: 933
- 被引次数: 0
出版历程
- 收稿日期: 2008-10-09
- 修回日期: 2009-01-03
- 刊出日期: 2009-05-15

Vibrations of FGM Thin Cylindrical Shells With Exponential Volume Fraction Law

1.
Department of Mathematics, the Islamia University of Bahawalpur, Pakistan;
Department of Mathematics, Government College University, Faisalabad, Pakistan

摘要

摘要: 研究了指数型体积分数对功能梯度薄圆柱壳振动频率的影响．壳体厚度方向上的材料特性呈指数律变化．由Love薄壳理论，得到应变-位移及曲率-位移关系表达式A·D2利用Rayleigh-Ritz方法，导出壳体的固有频率方程．假定轴向形态关系是典型的梁函数．壳体的固有频率取决于组合材料的体积分数．所得结果与已有文献的结果进行对比分析，说明本方法是正确的．
- 指数型体积分数 /
- 功能梯度材料（FGM） /
- 圆柱壳 /
- 振动 /
- Rayleigh-Ritz法
Abstract: The influence of an exponential volume fraction law on the vibration frequencies of thin functionally graded cylindrical shells was studied. Material properties in the shell thickness direction were graded in a ccordance with the exponential law. Expressions for the strain-displacement and curvature-displacement relationships were taken from Love.s thin shell theory. The Rayleigh-Ritz approach was used to derive the shell eigenfr equency equation. Axial modal dependence is assumed in the characteristic beam functions. Natural frequencies of the shells are observed to be dependent on the constituent volume fractions. The results are compared with those available in the literature for the validity of the present methodology.
- exponential volume fraction law /
- functionally graded materials(FGM) /
- cylindrical shells /
- vibrations /
- the Rayleigh-Ritz approach

HTML全文

参考文献(23)

[1]	Love A E H. On the small free vibrations and deformations of a thin elastic shell[J]. Philosachical Transactions of the Royal Society of London,Series A,1888,179:491-549. doi: 10.1098/rsta.1888.0016
[2]	Leissa A W. Vibration of shells[R]. NASA SP-288,1973; Reprinted by the Acoustical Society of America,American Institute of Physics,1993.
[3]	Blevins R D.Formulas for Natural Frequency and Mode Shape[M].New York: Van Nostrand Reinhold,1979.
[4]	Markus S. The Mechanics of Vibrations of Cylindrical Shell[M].New York: Elsevier,1988.
[5]	Arnold R N,Warburton G B. Flexural vibrations of the walls of thin cylindrical shells having freely supported ends[J].Proc Royal Soc London,Ser A,1949,197(1049): 238-256. doi: 10.1098/rspa.1949.0061
[6]	Makino A,Araki N,Kitajima H,et al.Transient temperature response of functionally gradient material subjected to partial step-wise heating[J].Trans Japan Soc Mech Engg,Ser B,1994,60:4200-4006. doi: 10.1299/kikaib.60.4200
[7]	Koizumi M. The concept of FGM[J].Ceramic Transactions:Functionally Gradient Material,1993,34:3-10.
[8]	Loy C T,Lam K Y,Reddy J N. Vibration of functionally graded cylindrical shells[J].International Journal of Mechanical Sciences,1999,41(3):309-324. doi: 10.1016/S0020-7403(98)00054-X
[9]	Pradhan S C,Loy C T,Lam K Y,et al.Vibration characteristics of functionally graded cylindrical shells under various boundary conditions[J].Appl Acoust,2000,61(1):111-129. doi: 10.1016/S0003-682X(99)00063-8
[10]	Ying J,Lu C F,Chen W Q. Two dimentional elasticity solutions for functionally graded beams resting on elastic foundations[J].Composite Structures,2008,84(3):209-219. doi: 10.1016/j.compstruct.2007.07.004
[11]	Sheng G G,Wang X. Thermal vibration,buckling and dynamic stability of functionally graded cylindrical shells embedded in an elastic medium[J].Journal of Reinforced Plastics and Composites,2007,27(2):117-134. doi: 10.1177/0731684407082627
[12]	LI Xiang-yu,DING Hao-jiang,CHEN Wei-qiu.Pure bending of simply supported circular plate of transversely isotropic functionally graded material[J].Journal of Zhejiang University Science A,2006,7(8):1324-1328. doi: 10.1631/jzus.2006.A1324
[13]	Chen W Q,Bian Z G,Ding H J. Three-dimensional vibration analysis of fluid-filled orthotropic FGM cylindrical shells[J].Journal of Mechanical Sciences,2004,46(1):159-171. doi: 10.1016/j.ijmecsci.2003.12.005
[14]	Najafizadeh M M,Isvandzibaei M R. Vibration of functionally graded cylindrical shells based on higher order shear deformation plate theory with ring support[J].Acta Mechanica,2007,191(1/2):75-91. doi: 10.1007/s00707-006-0438-0
[15]	Arshad S H,Naeem M N,Sultana N. Frequency analysis of functionally graded material cylindrical shells with various volume fraction laws[J].Proc IMechE Part C:Journal of Mechanical Engineering Science,2007,221(12):1483-1495. doi: 10.1243/09544062JMES738
[16]	Sewall J L,Naumann E C. An experimental and analytical vibration study of thin cylindrical shells with and without longitudinal stiffeners[R]. NASA TND-4705,1968.
[17]	Sharma C B,Johns D J. Vibration characteristics of a clamped-free and clamped-ring-stiffened circular cylindrical shell[J].Journal of Sound and Vibration,1971,14(4):459-474. doi: 10.1016/0022-460X(71)90575-X
[18]	Messina A,Soldatos K P. Ritz-type dynamic analysis of cross-ply laminated circular cylinders subjected to different boundary conditions[J].Journal of Sound and Vibration,1999,227(4):749-768. doi: 10.1006/jsvi.1999.2347
[19]	Soldatos K P,Messina A. Vibration studies of cross-ply laminated shear deformable circular cylinders on the basis of orthogonal polynomials[J].Journal of Sound and Vibration,1998,218(2):219-243. doi: 10.1006/jsvi.1998.1769
[20]	Wang C M,Swaddiwudhipong S,Tian J. Ritz method for vibration analysis of cylindrical shells with ring stiffeners[J].Journal of Engineering Mechanics,1997,123(2):134-142. doi: 10.1061/(ASCE)0733-9399(1997)123:2(134)
[21]	Naeem M N,Sharma C B. Prediction of natural frequencies for thin circular cylindrical shells[J].Proc IMechE Part C:Journal of Mechanical Engineering Science,2000,(10):1313-1328.
[22]	Chung H. Free vibration analysis of circular cylindrical shells[J].Journal of Sound and Vibration,1981,74(3):331-350. doi: 10.1016/0022-460X(81)90303-5
[23]	Goncalves P B,Ramos N R S S. Numerical method for vibration analysis of cylindrical shells[J].Journal of Engineering Mechanics,1997,123(6):544-550. doi: 10.1061/(ASCE)0733-9399(1997)123:6(544)