含分层复合材料层合梁弯曲问题的一般解法

韩海涛; 张铮; 卢子兴

doi:10.3879/j.issn.1000-0887.2010.07.009

含分层复合材料层合梁弯曲问题的一般解法

doi: 10.3879/j.issn.1000-0887.2010.07.009

北京航空航天大学航空科学与工程学院,北京 100191

基金项目: 国家自然科学基金(重点)资助项目(10932001);凡舟基金资助项目(20070501);教育部留学回国人员科研启动基金资助项目

详细信息

作者简介:
韩海涛(1982- ),男,河北保定人,博士生(E-mail:hh@tase.buaa.edu.cn);卢子兴(1960- ),男,河北枣强人,教授(联系人.Tel:+86-10-82317507;Fax:+86-10-82328501,E-mail:luzixing@buaa.edu.cn).

中图分类号: TB322
计量
- 文章访问数: 1455
- HTML全文浏览量: 64
- PDF下载量: 859
- 被引次数: 0
出版历程
- 收稿日期: 1900-01-01
- 修回日期: 2010-05-14
- 刊出日期: 2010-07-15

Analytical Method on Bending of Composite Laminated Beams With Delaminations

School of Aeronautical Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, P. R. China

摘要

摘要: 基于一阶剪切梁理论，考虑分层边缘区域的变形特点，提出了含穿透分层复合材料梁模型．与传统分层模型不同，该文将未分层部分看作上下子梁，放弃了传统模型中分层前缘横截面始终保持平面的假设．通过分层前缘的位移连续条件和内力连续条件，建立了粘合段和分层段的控制方程．并且，应用该模型对不同边界条件下含不同分层尺寸对称和非对称分层的复合材料层合梁弯曲问题进行了求解，结果与三维有限元计算的结果一致，从而证明了模型的有效性和适用性．
- 复合材料 /
- 层合梁 /
- 分层 /
- 剪切理论
Abstract: Based on the first-order shear deformable beam theory, a refined model for composite beams containing a through-the-width delamination was presented, and the deformation at the delamination front was considered. Different from the ordinary delaminated beam theory, each of the perfectly bonded portions of the new model was constructed as two separated beams along the in terface, and the plane section assumption at the delamination front was released. The governing equations of the delaminated portions and bonded ones were established, combined with continuity conditions of displacements and internal forces. The solutions of delaminated composite beams with different boundary conditions, delamination locations and sizes were shown in excellent agreement with the finite element results, which demonstrate the efficiency and applicability of the presentmodel.
- composite /
- laminated beam /
- delamination /
- shear deformable theory

HTML全文

参考文献(11)

[1]	Chai H, Babcock C D, Knauss W G. One dimensional modeling of failure in laminated plates by delamination buckling[J]. International Journal of Solids and Structures, 1981, 17(11): 1069-1083. doi: 10.1016/0020-7683(81)90014-7
[2]	冯世宁, 陈浩然. 含分层损伤复合材料层合板非线性动力稳定性[J]. 复合材料学报, 2006, 23(1): 154-160.
[3]	朱菊芬, 牛海英. 双分层损伤层合梁屈曲有限元分析[J]. 大连理工大学学报, 2004, 44(1): 20-25.
[4]	Aslan Z, Sahin M. Buckling behavior and compressive failure of composite laminates containing multiple large delaminations[J]. Composite Structures, 2009, 89(3): 382-390. doi: 10.1016/j.compstruct.2008.08.011
[5]	Chen H P. Shear deformation theory for compressive delamination buckling and growth[J]. American Institute of Aeronautics and Astronautics Journal, 1991, 29(5): 813-819.
[6]	Moradi S, Taheri F. Application of differential quadrature method to the delamination buckling of composite plates[J]. Computers and Structures, 1999, 70(6): 615-623. doi: 10.1016/S0045-7949(98)00200-4
[7]	Rodman U, Saje M, Planinc I, Zupan D. Exact buckling analysis of composite elastic columns including multiple delaminations and transverse shear[J]. Engineering Structures, 2008, 30(6): 1500-1514. doi: 10.1016/j.engstruct.2007.10.003
[8]	Parlapalli M, Shu D W. Buckling analysis of two-layer beams with an asymmetric delamination[J]. Engineering Structures, 2004, 26(5): 651-658. doi: 10.1016/j.engstruct.2004.01.003
[9]	Gu H Z, Chattopadhyay A. A new higher-order plate theory in modeling delamination buckling of composites[J]. American Institute of Aeronautics and Astronautics Journal, 1994, 32(8): 1709-1716.
[10]	Wang J L, Qiao P Z. Novel beam analysis of end notched flexure specimen for mode—Ⅱ fracture[J]. Engineering Fracture Mechanics, 2004, 71(2): 219-231. doi: 10.1016/S0013-7944(03)00096-1
[11]	Wang J L, Qiao P Z. Interface crack between two shear deformable elastic layers[J]. Journal of the Mechanics and Physics of Solids, 2004, 52(4): 891-905. doi: 10.1016/S0022-5096(03)00121-2