分析复合材料层合板弯曲和振动的一种有效无网格方法

王伟; 伊士超; 姚林泉

doi:10.3879/j.issn.1000-0887.2015.12.006

分析复合材料层合板弯曲和振动的一种有效无网格方法

doi: 10.3879/j.issn.1000-0887.2015.12.006

¹苏州大学数学科学学院, 江苏苏州 215006;²江苏科技大学数理学院, 江苏镇江 212003;³苏州大学城市轨道交通学院, 江苏苏州 215131

基金项目: 国家自然科学基金（11172192；11572210）

详细信息

作者简介:
王伟（1981—），女，江苏大丰人，博士生，讲师（E-mail: wangw@suda.edu.cn）;伊士超（1983—），男，江苏淮安人，博士（通讯作者. E-mail: shichaoyi@just.edu.cn).

中图分类号: O343.8
计量
- 文章访问数: 1586
- HTML全文浏览量: 158
- PDF下载量: 597
- 被引次数: 0
出版历程
- 收稿日期: 2015-09-23
- 修回日期: 2015-10-23
- 刊出日期: 2015-12-15

An Effective Meshfree Method for Bending and Vibration Analyses of Laminated Composite Plates

¹School of Mathematical Sciences, Soochow University, Suzhou, Jiangsu 215006, P.R.China;²School of Mathematics and Physics, Jiangsu University of Science and Technology,Zhenjiang, Jiangsu 212003, P.R.China;³School of Urban Rail Transportation, Soochow University, Suzhou, Jiangsu 215131, P.R.China

Funds: The National Natural Science Foundation of China（11172192；11572210）

摘要

摘要: 基于高阶剪切法向变形板理论（HOSNDPT）利用无网格方法对层合板弯曲和振动问题进行数值分析.在通常的径向点插值法（RPIM）中对每个Gauss(高斯)点或计算点需要求矩矩阵的逆，且受到影响域半径大小的限制.而在加权节点径向点插值法（WN-RPIM）近似中,求解系统矩阵的逆的数量等于问题域中的节点数量，它远远小于Gauss点的数目，可以大大减少矩矩阵求逆的计算量,且克服了RPIM中影响域半径大小的限制.首先，将三维板位移分解成厚度和面内位移的乘积，在厚度方向使用正交Legendre多项式作为基函数，在板的面内使用WNRPIM来构造形函数.然后，通过对层合板的弯曲问题进行数值计算表明WN-RPIM的计算精度和稳定性.最后，将该方法推广到对不同边界条件、不同厚跨比、不同铺设方式的层合板振动问题的数值计算，数值结果表明了本文提供方法的适用性和有效性.
- 复合材料层合板 /
- 振动 /
- 高阶剪切和法向变形板理论（HOSNDPT） /
- 径向点插值法 /
- 加权节点的径向点插值无网格法（WN-RPIM）
Abstract: Numerical analysis of laminated plates’ bending and vibration problems was presented based on the high order shear and normal deformation plate theory (HOSNDPT) with the meshless method. For the usual radial point interpolation method (RPIM), the inverses of the moment matrices are required for each Gauss point or calculation point, and are limited by the radius of the domain. For the weighted node radial point interpolation method (WN-RPIM), the number of the inverses of the system matrices is equal to the number of nodes in the problem domain, which is far less than the number of Gauss points, so the WN-RPIM can greatly reduce the computation complexity of the moment matrices and overcome the limitations on the RPIM. First, the 3D plate displacement was decomposed into the product of the thickness-direction and in-plane displacements, and the orthogonal Legendre polynomials were used as basis functions in the thickness direction, the WN-RPIM was employed in plane to construct the shape functions. Then, the numerical calculation of the bending problems of laminated plates verified the accuracy and stability of the WN-RPIM. At last, the proposed method was extended to the numerical calculation of the vibration problems of laminated plates with different boundary conditions, different thickness-to-span ratios and different laying patterns. The numerical results show the applicability and effectiveness of the proposed method.

HTML全文

参考文献(16)

[1]	Reddy J N.Mechanics of Laminated Composite Plates and Shells: Theory and Analysis [M]. New York: CRC Press, 1997.
[2]	Soldatos K P, Watson P. Accurate stress analysis of laminated plates combing a two-dimensional theory with the exact three-dimensional solution for simply supported edges[J].Mathematics and Mechanics of Solids,1997,2(4): 459-489.
[3]	Lee P C Y, Syngellakis S, Hou J P. A two-dimensional theory for high-frequency vibrations of piezoelectric crystal plates with or without electrodes[J].Journal of Applied Physics,1987,26(4): 1249-1262.
[4]	Mindlin R C, Medlick M A. Extensional vibrations of elastic plates[J].Journal of Applied Mechanics,1959,26(2): 145-151.
[5]	Batra R C, Vidoli S. Higher-order piezoelectric plate theory derived from a three-dimensional variational principle[J].AIAA Journal,2012,40(1): 91-104.
[6]	Batra R C, Aimmanee S. Vibrations of thick isotropic plates with higher order shear and normal deformable plate theories[J].Computers & Structures,2005,83(12/13): 934-955.
[7]	Sze K Y, Yao L Q, Pian T H H. An eighteen-node hybrid-stress solid-shell for homogenous and laminated structures[J].Finite Elements in Analysis and Design,2002,38(4): 353-374.
[8]	YAO Lin-quan, Sze K Y. A hybrid-stress solid-shell element for non-linear analysis of piezoelectric structures[J].Science in China Series E: Technological Sciences,2009,52(3): 575-583.
[9]	YIN Yu, YAO Lin-quan, CAO Yang. A 3D shell-like approach using element-free Galerkin method for analysis of thin and thick plate structures[J].Acta Mechanica Sinica,2013,29(1): 85-98.
[10]	CAO Yang, YAO Lin-quan, YI Shi-chao. A weighted nodal-radial point interpolation meshless method for 2D solid problems[J].Engineering Analysis With Boundary Elements,2014,39: 88-100.
[11]	Xiao J R, Gilhooley D F, Batra R C, Gillespie J J W, McCarthye M A. Analysis of thick composite laminates using a higher-order shear and normal deformable plate theory(HOSNDPT) and a meshless method[J].Composites Part B: Engineering,2008,39(2): 414-427.
[12]	Ferreira A J M, Roque C M C, Martins P A L S. Radial basis functions and higher-order shear deformation theories in the analysis of laminated composite beams and plates[J].Composite Structures,2004,66(1/4): 287-293.
[13]	陈富军, 魏春志, 姚林泉. 基于局部移动Kriging无网格方法的层合板自由振动分析[J]. 计算力学学报, 2013,30(4): 559-564.(CHEN Fu-jun, WEI Cun-zhi, YAO Lin-quan. Free vibration analysis of laminated composite plates by local moving Kriging meshless method[J].Journal of Computational Mechanics,2013,30(4): 559-564.(in Chinese))
[14]	Bui T Q, Khosravifard A, Zhang C, Hematiyan M R, Golub M V. Dynamic analysis of sandwich beams with functionally graded core using a truly meshfree radial point interpolation method[J].Engineering Structures,2013,47: 90-104.
[15]	李顶河, 徐建新, 卿光辉. Hamilton体系下含弱粘接复合材料层合板的灵敏度分析研究[J]. 应用数学和力学, 2010,31(12): 1465-1475.(LI Ding-he, XU Jian-xin, QING Guang-hui. Sensitivity analysis of composite laminated plates with bonding imperfection in Hamilton system[J].Applied Mathematics and Mechanics,2010,31(12): 1465-1475.(in Chinese))
[16]	王勖成. 有限单元法[M]. 北京: 清华大学出版社, 2003.(WANG Xu-cheng.Finite Element Method [M]. Beijing: Tsinghua University Press, 2003.(in Chinese))

施引文献

资源附件(0)

访问统计

计量

文章访问数: 1586
HTML全文浏览量: 158
PDF下载量: 597
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

分析复合材料层合板弯曲和振动的一种有效无网格方法

doi: 10.3879/j.issn.1000-0887.2015.12.006

作者简介:
王伟（1981—），女，江苏大丰人，博士生，讲师（E-mail: wangw@suda.edu.cn）;伊士超（1983—），男，江苏淮安人，博士（通讯作者. E-mail: shichaoyi@just.edu.cn).

计量

An Effective Meshfree Method for Bending and Vibration Analyses of Laminated Composite Plates

计量

目录

留言板

分析复合材料层合板弯曲和振动的一种有效无网格方法

doi: 10.3879/j.issn.1000-0887.2015.12.006

作者简介: 王伟（1981—），女，江苏大丰人，博士生，讲师（E-mail: wangw@suda.edu.cn）;伊士超（1983—），男，江苏淮安人，博士（通讯作者. E-mail: shichaoyi@just.edu.cn).

计量

出版历程

An Effective Meshfree Method for Bending and Vibration Analyses of Laminated Composite Plates

计量

出版历程

目录

作者简介:
王伟（1981—），女，江苏大丰人，博士生，讲师（E-mail: wangw@suda.edu.cn）;伊士超（1983—），男，江苏淮安人，博士（通讯作者. E-mail: shichaoyi@just.edu.cn).