颗粒弥散增强型核辐射屏蔽材料强度模型研究

何铮; 王绪伟; D·孔多

doi:10.3879/j.issn.1000-0887.2015.12.009

颗粒弥散增强型核辐射屏蔽材料强度模型研究

doi: 10.3879/j.issn.1000-0887.2015.12.009

¹国核华清(北京)核电技术研发中心有限公司,北京 102209;²巴黎第六大学, 巴黎 75005, 法国

基金项目: 国家科技重大专项(大型先进压水堆核电站重大专项)（2012ZX06004-012）

详细信息

作者简介:
何铮（1983—），男，北京人，高级工程师，博士(通讯作者. E-mail: hezheng@snptc.com.cn).

中图分类号: O324;TB332
计量
- 文章访问数: 1215
- HTML全文浏览量: 37
- PDF下载量: 640
- 被引次数: 0
出版历程
- 收稿日期: 2015-01-19
- 修回日期: 2015-09-12
- 刊出日期: 2015-12-15

A Meso-Micromechanics Approach to the Strength Criteria for Particle-Reinforced Radiation-Shielding Materials

¹State Nuclear Hua Qing(Beijing) Nuclear Power Technology R & D Centre Co., Ltd., Beijing 102209, P.R.China;²Pierre and Marie Curie University, Paris 75005, France

Funds: The National Science and Technology Major Project of China（2012ZX06004-012）

摘要

摘要: 基于微观力学的均匀化理论，旨在从核辐射屏蔽材料的微观结构、物理特性的角度出发，通过多尺度方法研究了材料宏观的机械力学性质.主要研究对象为颗粒弥散增强的孔隙基体材料，推导出了此类复合材料（金属基材料、非金属类材料）的强度准则模型，可预测微观孔隙率与颗粒相体积分数对材料宏观强度的影响.在塑性极限分析法的理论框架下，在介观上成功引入了速度场跳动来描述两相界面间的力学特性，利用刚性核的球体胞元模型进行求解.最后，选用了界面速度为0的速度场对模型进行研究，并初步探讨了界面效应对材料性能的影响.
- 屏蔽材料 /
- 颗粒增强 /
- 孔隙 /
- 多尺度 /
- 强度 /
- 塑性极限
Abstract: Based on the micromechanics homogenization theory, the macroscopic mechanical strength properties of radiation-shielding composite materials were investigated according to their meso-microstructures and local physical properties at micro-scale. Ductile micro-porous materials reinforced with rigid particles were studied. The strength criteria in view of the impacts of porosity and particle volume fraction were derived for metal matrix composites containing hard inclusions as well as other engineering composite materials (polymer matrix composites or geomaterials). Under the framework of the plastic limit analysis approach, the velocity field jump at meso-scale was introduced to describe the interfacial mechanical behavior between the matrix phase and the inclusion phase, and the rigid core unit cell model was applied in solution. In the end the velocity field in which the interfacial velocity equalled 0 was chosen for calculation, and the effects of the interfacial properties on the material strengths were discussed. The results show the effectiveness of the proposed multi-scale analysis framework.
- radiation shielding /
- particle-reinforced composite /
- void /
- multi-scale /
- strength /
- plastic limit

HTML全文

参考文献(18)

[1]	Electric Power Research Institute. Handbook of neutron absorber materials for spent nuclear fuel transportation and storage applications 2006 edition[R]. USA, 2006.
[2]	Westing House. AP1000 standard combined license technical report-spent fuel storage racks criticality analysis[R]. USA, 2006.
[3]	Kok K D.Nuclear Engineering Handbook [M]. New York: CRC Press, 2009: 152.
[4]	戴春娟, 刘希琴, 刘子利, 刘伯路. 铝基碳化硼材料中子屏蔽性能的蒙特卡罗模拟[J]. 物理学报, 2013,62(15): 152801.(DAI Chun-juan, LIU Xi-qin, LIU Zi-li, LIU Bo-lu. The Monte Carlo simulation of neutron shielding performance of boron carbide reinforced with aluminum composites[J].Acta Physica Sinica,2013,62(15): 152801.(in Chinese))
[5]	王美玲, 李刚, 陈乐, 刘晓珍, 孙长龙, 刘云明, 刘超红. B4C-Al中子吸收材料拉伸性能及断裂机理[J]. 原子能科学技术, 2014 ,〖STHZ〗48(5): 883-887.(WANG Mei-ling, LI Gang, CHEN Le, LIU Xiao-zhen, SUN Chang-long, LIU Yun-ming, LIU Chao-hong. Tensile property and fracture mechanism of B₄C-Al neutron absorber material[J].Atomic Energy Science and Technology,2014,48(5): 883-887. (in Chinese))
[6]	G?r?jeu M, Suquet P. Effective properties of porous ideally plastic or viscoplastic materials containing rigid particles[J].Journal of the Mechanics and Physics of Solids,1997,45(6): 873-902.
[7]	Vincent P G, Monerie Y, Suquet P. Porous materials with two populations of voids under internal pressure—I: instantaneous constitutive relations[J].International Journal of Solids and Structures,2009,46(3/4): 480-506.
[8]	Vincent P G, Monerie Y, Suquet P. Porous materials with two populations of voids under internal pressure—II： growth and coalescence of voids[J].International Journal of Solids and Structures,2009,46(3/4): 507-526.
[9]	He Z, Caratini G, Dormieux L, Kondo D. Homogenization of anisotropic elastoplastic behaviors of a porous polycrystal with interface effects[J].International Journal for Numerical and Analytical Methods in Geomechanics,2013,37(18): 3213-3236.
[10]	He Z, Dormieux L, Lemarchand E, Kondo D. Cohesive Mohr-Coulomb interface effects on the strength criterion of materials with granular-based microstructure[J].European Journal of Mechanics-A/Solids,2013,42: 430-440.
[11]	Shen W Q, Kondo D, Dormieux L, Shao J F. A closed-form three scale model for ductile rocks with a plastically compressible porous matrix[J].Mechanics of Materials,2013,59: 73-86.
[12]	Maghous S, Dormieux L, Barthélémy J F. Micromechanical approach to the strength properties of frictional geomaterials[J].European Journal of Mechanics-A/Solids,2009,28(1): 179-188.
[13]	Castaneda P P. The effective mechanical properties of nonlinear isotropic composites[J]. Journal of the Mechanics and Physics of Solids,1991,39(1): 45-71.
[14]	Gurson A L. Continuum theory of ductile rupture by void nucleation and growth: part I—yield criterion and flow rules for porous ductile media[J].Journal of Engineering Materials and Technology,1977,99(1): 2-15.
[15]	Salenon J. An introduction to the yield design theory and its applications to soil mechanics[J].European Journal of Mechanics-A/Solids,1990,9(5): 477-500.
[16]	Dormieux L, Kondo D, Ulm F J. Microporomechanics [M]. New York: John Wiley & Sons, 2006.
[17]	Leblond J B, Perrin G, Suquet P. Exact results and approximate models for porous viscoplastic solids[J].International Journal of Plasticity,1994,10(3): 213-235.
[18]	He Z, Dormieux L, Kondo D. Strength properties of a Drucker-Prager porous medium reinforced by rigid particles[J].International Journal of Plasticity,2013,51: 218-240.