Numerical research of temperature field during resin transfer molding
-
摘要: 温度场是树脂基复合材料传递成型过程中最为重要的影响因素.通过对成型过程中温度场的数值研究,揭示温度场不仅仅影响了树脂浸润多孔介质的过程,而且本身也受到多孔介质的孔隙率、树脂反应热、树脂注入温度和树脂注入流量等因素的影响,并最终决定了制品的成型过程和制品质量.Abstract: The temperature field is the most important concern during resin transfer molding of resin-based composite materials. The temperature field deciding the molding process and product quality was investigated through numerical simulation. Some factors influencing the temperature field, such as porosity of the porous media, resin reaction heat, resin injection temperature and resin injection flux, were discussed. In the simulation the 3D 1st-order upwind scheme was applied for spatial discretization, and the implicit scheme was used for time integration. Comparison between the present results and those previous ones proves the correctness and effectiveness of the proposed numerical method. It is also shown that, the resin injection temperature influences the temperature field much more markedly than the other factors, and the factors’ effects on the part near the resin inlet are much weaker than those on the parts far away from the inlet, which means more temperature measure points shall be arranged in the zones far away from the inlet to better detect the real temperature field.
-
Key words:
- composite /
- resin transfer molding /
- temperature field /
- CFD /
- numerical analysis
-
[1] Rudd C. Preform processing for high volume resin transfer moulding(RTM)[D]. PhD Thesis. Nottingham: University of Nottingham, 1989. [2] Kendall K N. Mould design for high volume resin transfer moulding[D]. PhD Thesis. Nottingham: University of Nottingham, 1991. [3] Abbassi A, Shahnazari M R. Numerical modeling of mold filling and curing in non-isothermal RTM process[J]. Applied Thermal Engineering,2004,24(16): 2453-2465. [4] Mal O, Couniot A, Dupret F. Non-isothermal simulation of the resin transfer moulding process[J]. Composites: Part A,1998,29(1/2): 189-198. [5] Shojaei A, Ghaffarian S R, Karimian S M H. Three-dimensional process cycle simulation of composite parts manufactured by resin transfer molding[J]. Composite Structures,2004,65(3/4): 381-390. [6] Shojaei A, Ghaffarian S R, Karimian S M H. Simulation of the three-dimensional non-isothermal mold filling process in resin transfer molding[J]. Composites Science and Technology,2003,63(13): 1931-1948. [7] Cheung A, Yu Y, Pochiraju K. Three-dimensional finite element simulation of curing of polymer composites[J]. Finite Elements in Analysis and Design,2004,40(8): 895-912. [8] Antonelli D, Farina A. Resin transfer moulding: mathematical modelling and numerical simulations[J]. Composites: Part A,1999,30(12): 1367-1385. [9] CHEN Ren-liang, LI Ming-cheng. Study of flow and temperature in resin transfer molding process by numerical model[J]. Transactions of Nanjing University of Aeronautics & Astronautics,2003,20(2): 165-171. [10] 徐晶磊, 阎超, 范晶晶. 通过求解输运方程计算壁面距离[J]. 应用数学和力学, 2011,32(2): 135-143.(XU Jing-lei, YAN Chao, FAN Jing-jing. Computations of wall distances by solving a transport equation[J]. Applied Mathematics and Mechanics,2011,32(2): 135-143.(in Chinese)) [11] Rudd C D, Long A C, Kendall K N, Mangin C. Liquid Molding Technologies [M]. England: Woodhead Publishing Limited, 1997. [12] Chow P, Cross M, Pericleous K. A nature extension of the conventional finite volume method into polygonal unstructured meshes for CFD application[J]. Applied Mathematical Modelling,1996,20(2): 170-183. [13] Kamal M R, Sourour S. Kinetics and thermal characterization of thermoset cure[J]. Polymer Engineering & Science,1973,13(1): 59-64. [14] 张红娜, 宇波, 王艺, 魏进家, 李凤臣. 对论文“任意精度的三点紧致显格式及其在CFD中的应用”的评论[J]. 应用数学和力学, 2009,30(5): 623-630.(ZHANG Hong-na, YU Bo, WANG Yi, WEI Jin-jia, LI Feng-chen. Comments on the paper ‘three-point explicit compact difference scheme with arbitrary order of accuracy and its application in CFD’[J]. Applied Mathematics and Mechanics,2009,30(5): 623-630.(in Chinese))
点击查看大图
计量
- 文章访问数: 912
- HTML全文浏览量: 74
- PDF下载量: 569
- 被引次数: 0