Design and Optimization Study on Blast Resistance of Irregular Lattice Structure Base Floor

ZHANG Hao; DUAN Shengyu; FU Rui; PENG Xiaoyang; LEI Hongshuai

doi:10.21656/1000-0887.450294

Volume 46 Issue 5

May 2025

Turn off MathJax

Article Contents

Article Navigation > Applied Mathematics and Mechanics > 2025 > 46(5): 582-590

ZHANG Hao, DUAN Shengyu, FU Rui, PENG Xiaoyang, LEI Hongshuai. Design and Optimization Study on Blast Resistance of Irregular Lattice Structure Base Floor[J]. Applied Mathematics and Mechanics, 2025, 46(5): 582-590. doi: 10.21656/1000-0887.450294

Citation:

PDF( 3609 KB)

Design and Optimization Study on Blast Resistance of Irregular Lattice Structure Base Floor

doi: 10.21656/1000-0887.450294

1.
Institute of Advanced Structure Technology, Beijing Institute of Technology, Beijing 100081, P.R.China
2.
Chongqing Tiema Industries Group Corporation, Chongqing 400050, P.R.China

Received Date: 2024-10-29
Rev Recd Date: 2024-12-05
Publish Date: 2025-05-01

Abstract

Abstract

A new type of irregular lattice structure base floor was proposed, and its blast resistance was characterized and optimized. The parametric modeling program for the lattice structure base floor was developed, the blast responses of the base floor were analyzed based on the finite element method, the surrogate model between the lattice structure geometrical parameters and the blast resistance responses was established, and the rapid solution of the fitness function was realized. A multi-objective optimization design method for the blast responses of the lattice structure base floor was developed, and the lightweight design of the lattice structure was achieved. The finite element analysis results show that, the optimized design of the lattice structure base floor achieves a 24.1% weight reduction and a 41.7% blast resistance improvement at the same time. This study provides methodological support and technical guidance for the design and application of irregular blast-resistance equipment such as armored vehicle base floors.
- lattice structure,
- blast resistance,
- multi-objective optimization,
- numerical simulation

FullText(HTML)

References(22)

References

[1]	林文乐, 王硕, 严波. 柱状炸药自由空气爆炸的网格划分方法研究[J]. 兵器装备工程学报, 2022, 43(1): 61-67. doi: 10.11809/bqzbgcxb2022.01.009 LIN Wenle, WANG Shuo, YAN Bo. Study on grid division method by cylindrical explosions in infinite air[J]. Journal of Ordnance Equipment Engineering, 2022, 43(1): 61-67. (in Chinese) doi: 10.11809/bqzbgcxb2022.01.009
[2]	TRAJKOVSKI J, PERENDA J, KUNC R. Blast response of light armoured vehicles (LAVs) with flat and V-hull floor[J]. Thin-Walled Structures, 2018, 131: 238-244. doi: 10.1016/j.tws.2018.06.040
[3]	段晟昱, 王潘丁, 刘畅, 等. 增材制造三维点阵结构设计、优化与性能表征方法研究进展[J]. 航空制造技术, 2022, 65(14): 36-48. DUAN Shengyu, WANG Panding, LIU Chang, et al. Research progress on design, optimization and performance characterization of additive manufactured 3D lattice structures[J]. Aeronautical Manufacturing Technology, 2022, 65(14): 36-48. (in Chinese)
[4]	徐田秋, 敬晨晨, 毛昊, 等. 电弧增材制造金属点阵结构研究进展[J]. 电焊机, 2023, 53(2): 76-86. XU Tianqiu, JING Chenchen, MAO Hao, et al. Research progress of metal lattice structure based on wire arc additive manufacturing[J]. Electric Welding Machine, 2023, 53(2): 76-86. (in Chinese)
[5]	陈明继, 裴永茂, 方岱宁. 夹芯型雷达吸波结构的多目标优化[J]. 应用数学和力学, 2010, 31(3): 315-323. doi: 10.3879/j.issn.1000-0887.2010.03.007 CHEN Mingji, PEI Yongmao, FANG Daining. Multi-objective optimization design of radar absorbing sandwich structure[J]. Applied Mathematics and Mechanics, 2010, 31(3): 315-323. (in Chinese) doi: 10.3879/j.issn.1000-0887.2010.03.007
[6]	李爽, 杨金水, 吴林志, 等. 边界和杆件倾角对沙漏点阵结构振动特性的影响[J]. 哈尔滨工程大学学报, 2019, 40(5): 878-885. LI Shuang, YANG Jinshui, WU Linzhi, et al. Influence of boundary conditions and truss inclination angles on vibration characteristics of the hourglass lattice structure[J]. Journal of Harbin Engineering University, 2019, 40(5): 878-885. (in Chinese)
[7]	FLECK N A, DESHPANDE V S. The resistance of clamped sandwich beams to shock loading[J]. Journal of Applied Mechanics, 2004, 71(3): 386-401. doi: 10.1115/1.1629109
[8]	YI T, CHEN C Q. The impact response of clamped sandwich beams with ordinary and hierarchical cellular cores[J]. International Journal of Impact Engineering, 2012, 47: 14-23. doi: 10.1016/j.ijimpeng.2012.03.001
[9]	WANG Y, ZHAO W, ZHOU G, et al. Analysis and parametric optimization of a novel sandwich panel with double-V auxetic structure core under air blast loading[J]. International Journal of Mechanical Sciences, 2018, 142/143: 245-254. doi: 10.1016/j.ijmecsci.2018.05.001
[10]	韩笑, 杨丽红, 于国财, 等. 多层梯度点阵夹芯结构抗爆性能研究[J]. 应用力学学报, 2018, 35(1): 185-190. HAN Xiao, YANG Lihong, YU Guocai, et al. Blast resistance of multilayer graded lattice sandwich structures[J]. Chinese Journal of Applied Mechanics, 2018, 35(1): 185-190. (in Chinese)
[11]	YANG L, SUI L, LI X, et al. Sandwich plates with gradient lattice cores subjected to air blast loadings[J]. Mechanics of Advanced Materials and Structures, 2021, 28(13): 1355-1366. doi: 10.1080/15376494.2019.1669092
[12]	李金矿, 万文玉, 刘闯. 形状记忆合金蜂窝结构抗冲击性能研究[J]. 应用数学和力学, 2024, 45(1): 34-44. doi: 10.21656/1000-0887.440004 LI Jinkuang, WAN Wenyu, LIU Chuang. Study on impact resistance of shape memory alloy honeycomb structures[J]. Applied Mathematics and Mechanics, 2024, 45(1): 34-44. (in Chinese) doi: 10.21656/1000-0887.440004
[13]	时圣波, 王韧之, 唐佳宾, 等. 复合点阵结构强爆炸冲击载荷下的损伤机理与动态响应特性[J]. 爆炸与冲击, 2023, 43(6): 39-53. SHI Shengbo, WANG Renzhi, TANG Jiabin, et al. Failure mechanism and dynamic response of a composite lattice structure under intense explosion loadings[J]. Explosion and Shock Waves, 2023, 43(6): 39-53. (in Chinese)
[14]	FENG L J, WEI G T, YU G C, et al. Underwater blast behaviors of enhanced lattice truss sandwich panels[J]. International Journal of Mechanical Sciences, 2019, 150: 238-246. doi: 10.1016/j.ijmecsci.2018.10.025
[15]	YAN Z, LIU Y, YAN J, et al. Blast performance of 3D-printed auxetic honeycomb sandwich beams[J]. Thin-Walled Structures, 2023, 193: 111257. doi: 10.1016/j.tws.2023.111257
[16]	RAMOS H, PICKERING E, ALMAHRI S, et al. Experimental evaluation of hybrid lattice structures subjected to blast loading[J]. Additive Manufacturing, 2023, 76: 103751. doi: 10.1016/j.addma.2023.103751
[17]	YUEN S C K, LANGDON G S, NURICK G N, et al. Response of V-shape plates to localised blast load: experiments and numerical simulation[J]. International Journal of Impact Engineering, 2012, 46: 97-109. doi: 10.1016/j.ijimpeng.2012.02.007
[18]	张凯, 张庆明, 贾伟. 多层圆管夹芯结构的装甲车底板防爆设计[J]. 安全与环境学报, 2017, 17(3): 969-974. ZHANG Kai, ZHANG Qingming, JIA Wei. On the safety design of the multilayer circular-tube structure of the armored vehicle plate under the explosion loading[J]. Journal of Safety and Environment, 2017, 17(3): 969-974. (in Chinese)
[19]	NEMAT-NASSER S, GUO W G, KIHL D P. Thermomechanical response of AL-6XN stainless steel over a wide range of strain rates and temperatures[J]. Journal of the Mechanics and Physics of Solids, 2001, 49(8): 1823-1846. doi: 10.1016/S0022-5096(00)00069-7
[20]	费广磊, 马天宝, 郝莉. 三维爆炸与冲击问题的大规模高性能计算研究[J]. 应用数学和力学, 2011, 32(3): 357-364. doi: 10.3879/j.issn.1000-0887.2011.03.011 FEI Guanglei, MA Tianbao, HAO Li. Large scall high performance computation on 3D explosion and shock problems[J]. Applied Mathematics and Mechanics, 2011, 32(3): 357-364. (in Chinese) doi: 10.3879/j.issn.1000-0887.2011.03.011
[21]	解江, 李翰, 周书婷, 等. 爆炸冲击载荷下航空铝合金平板动态响应数值分析方法[J]. 应用数学和力学, 2017, 38(4): 410-420. doi: 10.21656/1000-0887.370252 XIE Jiang, LI Han, ZHOU Shuting, et al. A numerical method for dynamic responses of aviation aluminum alloy plates under blast loads[J]. Applied Mathematics and Mechanics, 2017, 38(4): 410-420. (in Chinese) doi: 10.21656/1000-0887.370252
[22]	DHARMASENA K P, WADLEY H N G, WILLIAMS K, et al. Response of metallic pyramidal lattice core sandwich panels to high intensity impulsive loading in air[J]. International Journal of Impact Engineering, 2011, 38(5): 275-289. doi: 10.1016/j.ijimpeng.2010.10.002