The Effect of Transverse Shear Deformation on Stress Concentration Factors for Shallow Shells with a Small Circular Hole

Loo Wen-da; Cheng Yao-shun

Article Contents

Article Navigation > Applied Mathematics and Mechanics > 1991 > 12(2): 195-202

Loo Wen-da, Cheng Yao-shun. The Effect of Transverse Shear Deformation on Stress Concentration Factors for Shallow Shells with a Small Circular Hole[J]. Applied Mathematics and Mechanics, 1991, 12(2): 195-202.

Citation:

PDF( 461 KB)

The Effect of Transverse Shear Deformation on Stress Concentration Factors for Shallow Shells with a Small Circular Hole

Shanghai Institute of Appl, Math and Mech., Shanghai University of Technology, Shanghai

Received Date: 1990-03-28
Publish Date: 1991-02-15

Abstract

Abstract

Simplified equations are derived for the analysis of stress concentration for shear-deformable shallow shells with a small hole. General solutions of the equations are obtained, in terms of series, for shallow spherical shells and shallow circular cylindrical shells with a small circular hole. Approximate explicit solutions and numerical results are obtianed for the stress concentration factors of shallow circular cylindrical shells with a small hole on which uniform pressure is acting.
- shells,
- transverse shear deformation,
- stress concentration

FullText(HTML)

References(6)

References

[1]	Reissner,E.and F.Y.M.Wan,A note on the linear theory of shallow shear-deformable shells,Journal of Applied Mathematics and Physics,ZAMP,33(1982),425-427.
[2]	Reissner,E.and F.Y.M.Wan,On the effect of transverse shear deformability on stress concentration factors for twisted and sheared shallow spherical shells,Journal of Applied Mechanics,ASME,53(1986),597-601.
[3]	徐秉汉、裴俊厚、朱邦俊,《壳体开孔的理论与实验》,北京,国防工业出版社(1987).
[4]	Reissner,E.,On the determination of stresses and displacements for unsymmetrical deformations of shallow spherical shells,Journalof Mathematics and Physics,38(1969),16-35.
[5]	Reissner,E.,On the transverse twisting of shallow spherical ring caps,Journal of Applied Mechanics,47(1980),101-105.
[6]	钱令希等,圃柱壳开孔问题—单圆孔基本解,大连工学院学.3,4(1985).