The Analyses of the Three-Dimensional Stress Structurenear the Crack Tip of Mode I CT Specimens in Elastic-Plastic State Part 2:The Analyses of the Stress Structure

Yue Z. F.; Zheng C. Q.

Article Contents

Article Navigation > Applied Mathematics and Mechanics > 1993 > 14(9): 775-785

Yue Z. F., Zheng C. Q.. The Analyses of the Three-Dimensional Stress Structurenear the Crack Tip of Mode I CT Specimens in Elastic-Plastic State Part 2:The Analyses of the Stress Structure[J]. Applied Mathematics and Mechanics, 1993, 14(9): 775-785.

Citation:

PDF( 717 KB)

The Analyses of the Three-Dimensional Stress Structurenear the Crack Tip of Mode I CT Specimens in Elastic-Plastic State Part 2:The Analyses of the Stress Structure

Department of Engineering Mechanics, Northwestern Polyiechnical University, Xi'an

Received Date: 1991-06-25
Publish Date: 1993-09-15

Abstract

Abstract

Based on [1], the stress structures of the smooth region and shear lip of the specimens have been investigated in the paper.The characteristics of the stress structure in the smooth region have been found that the variable z can be separated out;the stresses in the midsection can be obtained by the plane strain FEM results or HRR structure modified by the stress triaxiality. The effects of load level and thickness on the stress structure can be reflected by the distribution of CTOD along the thickness direction. The obtained expressions of the stresses are very simple and visualized. The analyses of the stress structure in the shear lip show that the stresses can be obtained by different methods of interpolation to a certain precise degree.A new degree parameter of the plane strain state has been put forward and studied. The parameter can reflect relatively well the variation of the kind and thickness of the specimen as well as the load level. The fracture parameter has also been investigated to be sure that it can be obtained by modified CTOD with the stress triaxiality.
- stress structure,
- singularity,
- Z₁ region,
- stress triaxiality Rσ,
- CTOD,
- shear lip,
- interpolative method,
- degree parameter of the plane strain state

FullText(HTML)

References(19)

References

[1]	岳珠峰等,I型裂纹试件裂端三维应力结构分析之一—裂端约束参数与断裂参数分析,应用数学和力学,14(7)(1993),625-634.
[2]	Hutchinson,J.W.,Singular behaviour at the end of a tensile crack.in a hardening material,J.Mech.Phys.Solids,16(1968),13-31.
[3]	Rice,J.R.and G.F.Rosengren.Plane strain deformation near a crack tip in a power-law hardening material,J.Mech.Phys.Solids,16(1968),1-12.
[4]	岳珠峰,金属材料韧性断裂的计算模拟,西北工业大学硕士论文,(1991).
[5]	Su,J.and M.J.Tu,Plane stress elastic-plastic fracture criteria and constaint intensity in crack tip regions,Eng.Frac.Mech.,37(1990),675-680.
[6]	Shih,C.F.and M.D.German,Requirements for a one parameter characterization of crack tip fields by the HRR singularity,Int.J.Frac.,27(1981),27-43.
[7]	Su,J.,Z.J.Deng,Z.H.Li and M.J.Tu,Stress triaxiality in crack tip region of bend specimens with different crack-depth and fracture criterion at initiation,Eng.Frac.Mech.,36(1990),321-326.
[8]	庄韬,金属和合金在平面应变条件下的双参数弹塑性断裂判据,力学学报,17,(1987增刊),154-16.
[9]	Matsoukas,G.,B.Cotterell and Y.-W.Mar,The effect of shallow cracks on crack tip opening displacement,Eng.Frac.Mech.,24(1986),837-842.
[10]	Bapu Rao,M.N.,Three-dimensional analysis of a finite thick plate with a through crack,Int.J.Frac.,17(1981),43-45.
[11]	Bapu Rao,M.N.,Three-dimensional stress problem of a finite thick plate with a through crack under tension,Proc.ICF6,2(1986),963-969.
[12]	靳志和、黄克智,平板裂纹前缘三维效应区的弹性力学分析,固体力学学报,11(1990 ),106-116.
[13]	陈小明、杨南生、官忠信,弹塑性状态下I型裂纹前缘应力应变奇异性分析,应用数学与力学,8(7)(1987),611-616.
[14]	陈晓明、官忠信,三维变形状态下I型裂纹裂尖应力场结构有限元分析,应用数学与力学,9(6)(1988),559-565.
[15]	陈晓明,弹塑性三维应力结构分析,西北工业大学博士论文,(1988).
[16]	陈境,金属断裂研究文集,冶金出版社(1982).
[17]	陈晓明,杨南生,官忠信,弹塑性I型裂纹裂端三维应力结构分析,固体力学学报,11(1987),191-200.
[18]	Machida,K.,M.Kikuchi and H.Miyamoto,The thickness effects of the side-grooved CCT specimen,Transaction of Japan Society of Mechanical Engineers.491(1987),A.
[19]	陈晓明,杨南生,官忠信,弹塑性I型裂纹裂端三维应力结构分析,固体力学学报,11(1990)191-200.