热荷载作用下薄板的优化设计

倪晓琴; 程耿东

doi:10.3879/j.issn.1000-0887.2015.03.001

热荷载作用下薄板的优化设计

doi: 10.3879/j.issn.1000-0887.2015.03.001

大连理工大学工程力学系;工业装备结构分析国家重点实验室(大连理工大学), 辽宁大连 116024

详细信息

作者简介:
倪晓琴（1988—），女，山东人，硕士生（通讯作者. E-mail: nixiaoqin@mail.dlut.edu.cn）；程耿东（1941—），男，江苏人，中科院院士，博士生导师（E-mail: chenggd@dlut.edu.cn）.

中图分类号: O343
计量
- 文章访问数: 1347
- HTML全文浏览量: 162
- PDF下载量: 1096
- 被引次数: 0
出版历程
- 收稿日期: 2014-11-11
- 修回日期: 2015-01-07
- 刊出日期: 2015-03-15

Optimal Design of Thin Solid Elastic Plates Under Thermal Load

State Key Laboratory of Structural Analysis for Industrial Equipment(Dalian University of Technology); Department of Engineering Mechanics, Dalian University of Technology, Dalian, Liaoning 116024, P.R.China

摘要

摘要: 板壳结构是一大类广泛使用的结构元件.在热荷载作用下，当热膨胀受到约束时，板壳结构产生内力及挠度，严重时影响结构的正常服役.由于热荷载的特殊性，简单地均匀加大板壳结构的厚度并不能有效地减少热变形和热应力，热结构设计因此特别困难.该文研究在给定材料体积的条件下，通过优化板壳结构的厚度分布来减少弹性薄板结构在热载荷下的变形.以结构的变形能为优化目标，在给定材料体积的条件下，建立了设计板壳结构厚度分布的优化问题列式，并采用变分法，推导出优化准则，给出了修改厚度的迭代公式.应用商用有限元软件的热结构分析功能，对程序进行二次开发，从而实现该优化算法.算例结果表明，采用该方法优化弹性薄板的厚度分布，可以大幅度地减小结构热变形，是一种有效的热结构设计方法.
- 薄板 /
- 热荷载 /
- 厚度 /
- 优化准则
Abstract: Plates and shells constitute a large family of widely used structural elements. Under the action of thermal load, if the thermal expansion is restricted, membrane forces and bending moments will occur within the plate and shell structures and lead to large deformation which seriously affected normal service. Due to the particularity of thermal load, uniform increase of the plate or shell thickness can hardly reduce the thermal deformation and thermal stress effectively, and special experience and knowledge are required in thermal structural design. Thickness distribution optimization of the thin elastic plate structure with given material volume under thermal load was studied and aimed at reduction of thermal deformation. For the thickness distribution of the plate with given material volume, mathematical formulation of the optimization problem focused on minimum structural deformation energy was established. According to the formulation and with the variational method, the optimality criteria and the iterative scheme for modification of the thickness distribution were derived. And this optimization algorithm was implemented through secondary development in the commercial finite element programs. Results of the numerical examples show that, the presented method greatly reduces the thermal deformation of thin elastic plate structures through modification of the thickness distribution, and makes an effective optimization method for thermal structures.
- thin plate /
- heat load /
- thickness /
- optimization criterion

HTML全文

参考文献(15)

[1]	程耿东. 实心弹性薄板的最优设计[J]. 大连工学院学报, 1981,20(2): 1-11.（CHENG Geng-dong. Optimum design of thin, solid, elastic plates[J].Journal of Dalian Institute of Technology,1981,20(2): 1-11.（in Chinese））
[2]	CHENG Keng-tung, Olhoff N. Regularized formulation for optimal design of axisymmetric plates[J].International of Solids and Structures,1982,18(2): 153-169.
[3]	CHENG Keng-tung, Olhoff N. An investigation concerning optimal design of solid elastic plates[J].International of Solids and Structures,1981,17(3): 305-323.
[4]	Todoroki A, Ozawa T, Mizutani Y, Suzuki Y. Thermal deformation constraint using response surfaces for optimization of stacking sequences of composite laminates[J].Advanced Composite Materials,2013,22(4): 265-279.
[5]	王琪, 吉庭武, 肖曼玉, 谢公南. 轻质热防护系统多层材料组合结构的热应力分析[J]. 应用数学和力学, 2013,34(7): 742-749.（WANG Qi, JI Ting-wu, XIAO Man-yu, XIE Gong-nan. Numerical analysis on thermal stress of multilayer materials combined structures for a lightweight thermal protection system[J].Applied Mathematics and Mechanics,2013,34(7): 742-749.（in Chinese））
[6]	Xia Q, Wang M Y. Topology optimization of thermoelastic structures using level set method[J].Computational Mechanics,2008,42(6): 837-857.
[7]	Yan J, Cheng G D, Liu L. A uniform optimum material based model for concurrent optimization of thermoelastic structures and materials[J].Int J Simul Multi Design Optim,2008,2(4): 259-266.
[8]	孙十平, 张卫红. 热弹性结构的拓扑优化[J]. 力学学报, 2009,41(6): 878-887.（SUN Shi-ping, ZHANG Wei-hong. Topology optimal design of thermo-elastic structures[J].Chinese Journal of Theoretical Applied Mechanics,2009,41(6): 878-887.（in Chinese））
[9]	Cho S, Choi J Y. Efficient topology optimization of thermo-elasticity problems using coupled field adjoint sensitivity analysis method[J].Finite Elements in Analysis and Design,2005, 41(15): 1481-1495.
[10]	Zhang W H, Yang J G. A deep study on topology optimization of thermo-elastic problems[C]// Proceedings of the Second International Conference on Computational Methods for Thermal Problems.Dalian, China, 2011: 133-136.
[11]	Pedersen P, Pedersen N L. Strength optimized designs of thermoelastic structures[J].Structural and Multidisciplinary Optimization,2010,42(5): 681-691.
[12]	Zhang W H, Yang J G, Xu Y J, Gao T. Topology optimization of thermo-elastic structures: mean compliance minimization or elastic strain energy minimization[J].Structural and Multidisciplinary Optimization,2014,49(3): 417-429.
[13]	Li Q, Steven G P, Xie Y M. Displacement minimization of thermoelastic structures by evolutionary thickness designs[J].Computer Methods in Applied Mechanics and Engineering,1999,179(3/4): 361-378.
[14]	Pedersen P, Pedersen N L. Interpolation/penalization applied for strength design of 3D thermoelastic structures[J].Structural and Multidisciplinary Optimization,2012,45(6): 773-786.
[15]	徐芝纶. 弹性力学[M]. 北京: 高等教育出版社, 2006.（XU Zhi-lun.Elasticity [M]. Beijing: Higher Education Press, 2006.（in Chinese））